Show simple item record

dc.contributor.authorM. Fugazza
dc.contributor.authorL. Natale
dc.date.accessioned2017-05-08T21:09:33Z
dc.date.available2017-05-08T21:09:33Z
dc.date.copyrightJanuary 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-950x%281992%29118%3A1%281%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40914
dc.description.abstractIn the present engineering practice, direct formulas are not given for the preliminary hydraulic design of Jarlan‐type breakwaters: Only qualitative observations and heuristic considerations are reported. The writers analyze the wave attenuation produced by the permeable structure and propose design formulas that can be used for the optimized hydraulic design of Jarlan‐type breakwaters. The proposed model, based on the linear wave theory, is validated by comparison of the theoretical results with the experimental measurements of other authors. The results show that the Jarlan‐type breakwater with a single chamber gives the most effective wave reduction in the range of practical applications and that no particular configuration of the porous wall can be suggested as the best one. The size of the breakwater cannot be standardized, since the optimum hydraulic design of the structure is linked to the parameters of the design wave. Moreover, the proposed design formulas may be used to approximately predict the response of the structure to incident irregular waves.
dc.publisherAmerican Society of Civil Engineers
dc.titleHydraulic Design of Perforated Breakwaters
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue1
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1992)118:1(1)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1992:;Volume ( 118 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record