Show simple item record

dc.contributor.authorA. N. Williams
dc.contributor.authorP. T. Geiger
dc.contributor.authorW. G. McDougal
dc.date.accessioned2017-05-08T21:09:32Z
dc.date.available2017-05-08T21:09:32Z
dc.date.copyrightSeptember 1991
dc.date.issued1991
dc.identifier.other%28asce%290733-950x%281991%29117%3A5%28429%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40893
dc.description.abstractA numerical model is developed to analyze a flexible, floating breakwater consisting of a compliant, beam‐like structure anchored to the sea bed and kept under tension by a small buoyancy chamber at the tip. Additional stiffness is provided by mooring lines. The fluid motion is idealized as linearized, two‐dimensional potential flow and the breakwater is idealized as a one‐dimensional beam of uniform flexural rigidity and mass per unit length subjected to a constant axial force. The boundary integral equation method is applied to the fluid domain. Modifications are made to the basic formulation to account for the zero thickness of the idealized structure, and the dynamic behavior of the breakwater is described through an appropriate Green's function. Numerical results are presented illustrating the effects of the various wave and structural parameters on the efficiency of the breakwater. Small‐scale physical model tests were also carried out to validate this theory. In general, the agreement between experimental and numerical results was reasonable, but with considerable scatter.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexible Floating Breakwater
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue5
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1991)117:5(429)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1991:;Volume ( 117 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record