Show simple item record

dc.contributor.authorKevin R. Hall
dc.date.accessioned2017-05-08T21:09:30Z
dc.date.available2017-05-08T21:09:30Z
dc.date.copyrightMarch 1991
dc.date.issued1991
dc.identifier.other%28asce%290733-950x%281991%29117%3A2%28179%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40870
dc.description.abstractExperimental studies were undertaken to investigate phreatic surface motion in rubble-mound breakwater models. This motion was assessed as a function of a number of governing variables, including armor unit type, geometry of the armor layer, breakwater slope, and core permeability. Tests were conducted in a two-dimensional wave flume using regular waves. Both the maximum and average phreatic surface elevations were found to increase with increasing wave height, increasing wave period, and steeper slopes. The setup within the core was also significantly higher for tests with spheres in the armor layer, due to the increased permeability normal to the slope. Increasing core permeability resulted in sharp rises in the maximum and average phreatic surface elevations.
dc.publisherAmerican Society of Civil Engineers
dc.titleTrends in Phreatic Surface Motion in Rubble‐Mound Breakwaters
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue2
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1991)117:2(179)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1991:;Volume ( 117 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record