Show simple item record

dc.contributor.authorMin‐Chih Huang
dc.contributor.authorShyang‐Yu Baur
dc.date.accessioned2017-05-08T21:09:30Z
dc.date.available2017-05-08T21:09:30Z
dc.date.copyrightMarch 1991
dc.date.issued1991
dc.identifier.other%28asce%290733-950x%281991%29117%3A2%28174%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40869
dc.description.abstractThe hydrodynamic forces on taut nylon cable segments with PET shrouds in steady uniform flows are determined experimentally. Commercial 1.25 L (polyethylene terephthalate (PET) bottles are used as shroud material; the cable used has a diameter of 2.1 cm. The range of flow velocity is from 0.25 to 1.35 m/s. Both inline and transverse force coefficients are given as functions of the reduced velocity for three test models: Bare cable; cable with 50% area perforated shrouds; and cable with nonperforated shrouds. Comparisons of the dominant vibrating-force coefficients indicates that a cable with 50% area perforated shrouds may be a good candidate for fish and kelp aggregation devices.
dc.publisherAmerican Society of Civil Engineers
dc.titleVortex‐Induced Loadings on Taut Cables with PET Shrouds
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue2
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1991)117:2(174)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1991:;Volume ( 117 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record