Show simple item record

dc.contributor.authorZeki Demirbilek
dc.date.accessioned2017-05-08T21:09:28Z
dc.date.available2017-05-08T21:09:28Z
dc.date.copyrightSeptember 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-950x%281990%29116%3A5%28575%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40833
dc.description.abstractResults from an experimental investigation on sectional models of multitube risers are presented. A single cylinder was tested as a reference case. The data outlined herein contain new information about the hydrodynamic behavior of various riser bundles exposed to a steady current. The bulk of the experimental data are pertinent to the measured steady drag coefficients, and the transverse and in‐line motions of such risers. Data are also provided about the influence of turbulence, surface roughness, and the separation distance between the center and satellite pipes on the loading and response characteristics of the specific riser geometries tested. It was found that when flexibility in the transverse and in‐line directions of the test cylinders is allowed, large increases in both the steady drag coefficients and response amplitudes may occur compared to fixed cylinders. These increases were seen with varying intensity in both the subcritical and critical flow regimes.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Study of Production Risers in Steady Uniform Flow
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue5
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1990)116:5(575)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1990:;Volume ( 116 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record