Show simple item record

dc.contributor.authorR. Sundaravadivelu
dc.contributor.authorV. G. Idichandy
dc.contributor.authorS. R. Gandhi
dc.contributor.authorV. S. Raju
dc.date.accessioned2017-05-08T21:09:24Z
dc.date.available2017-05-08T21:09:24Z
dc.date.copyrightJanuary 1990
dc.date.issued1990
dc.identifier.other%28asce%290733-950x%281990%29116%3A1%2843%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40792
dc.description.abstractThe third general cargo berth at Paradeep Port situated on the east coast of India consists of a diaphragm wall anchored to a deaoman diaphragm wall by tie‐rods. In addition, the diaphragm wall is connected to two rows of large‐diameter vertical piles by a rigid deck system. The deck system being rigid and tie‐rods flexible, the lateral loads are shared between the piles and the deadman diaphragm wall. To assess the load sharing, forces in the tie‐rods were measured before and after dredging. The results obtained were compared with those of a finite element analysis of the structural system using beam elements for the diaphragm walls, piles, and beams, and boundary elements for the soil medium. The measured tie‐rod forces compared very well with the analytical result and confirmed that a substantial portion of the lateral load was transferred to the piles. Based on the studies, the design of another berth in the vicinity was modified to retain the vertical piles and eliminate the deadman diaphragm wall and tie‐rods, resulting in substantial savings in cost and time.
dc.publisherAmerican Society of Civil Engineers
dc.titleTie‐Rod Force Measurements in Cargo Berth
dc.typeJournal Paper
dc.journal.volume116
dc.journal.issue1
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1990)116:1(43)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1990:;Volume ( 116 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record