Show simple item record

dc.contributor.authorTodd L. Walton, Jr.
dc.contributor.authorWilliam N. Seelig
dc.date.accessioned2017-05-08T21:09:19Z
dc.date.available2017-05-08T21:09:19Z
dc.date.copyrightMay 1989
dc.date.issued1989
dc.identifier.other%28asce%290733-950x%281989%29115%3A3%28409%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40743
dc.description.abstractThis note describes a simplified method for estimating the flow rate and flow velocity through the gaps of permeable offshore segmented breakwaters caused by wave overtopping. The method incorporates previous two-dimensional laboratory tests and resulting empirical equations for estimating ponding (setup) behind the breakwater. Factors that can be investigated using this method are the influence of breakwater freeboard, wave height and period, breakwater length and spacing, number of breakwaters, distance offshore, water depth at the breakwater, and shore attachment on the flow rate. Other wave effects on hydraulics, such as diffraction, refraction, reflection, and wave-current interactions, have not been considered. The method can be extended to other similar situations via laboratory testing and/or analytical results on flow through and over breakwaters.
dc.publisherAmerican Society of Civil Engineers
dc.titleWave Overtopping Generated Flow Through Offshore Breakwater Gaps
dc.typeJournal Paper
dc.journal.volume115
dc.journal.issue3
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1989)115:3(409)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1989:;Volume ( 115 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record