Show simple item record

dc.contributor.authorJohn Antonopoulos
dc.date.accessioned2017-05-08T21:09:08Z
dc.date.available2017-05-08T21:09:08Z
dc.date.copyrightNovember 1987
dc.date.issued1987
dc.identifier.other%28asce%290733-950x%281987%29113%3A6%28648%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40630
dc.description.abstractThe comparison of the calculated minimum widths of a vertically‐walled breakwater derived from Sainflou and Molitor pressure diagrams shows that, for all design conditions, the Molitor widths are initially larger than those from Sainflou. Additionally, the divergence of the Molitor width away from Sainflou is well within the design criterion set for prestudy calculation and can be used safely in breakwater designs with a subsequent increase in construction costs. In contrast, above a certain wave height to breakwater depth ratio the situation is reversed and Molitor's empirical diagram must be applied carefully.
dc.publisherAmerican Society of Civil Engineers
dc.titleSimplified Methods to Calculate Wave Loadings on Vertical Wall Breakwater
dc.typeJournal Paper
dc.journal.volume113
dc.journal.issue6
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1987)113:6(648)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1987:;Volume ( 113 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record