Show simple item record

dc.contributor.authorWilliam A. Birkemeier
dc.date.accessioned2017-05-08T21:08:53Z
dc.date.available2017-05-08T21:08:53Z
dc.date.copyrightMay 1985
dc.date.issued1985
dc.identifier.other%28asce%290733-950x%281985%29111%3A3%28598%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40458
dc.description.abstractMany coastal engineering problems require an estimate of the seaward limit of sediment transport, defined as the minimum depth at which no measurable change in water depth occurs. A procedure to estimate this limit depth was evaluated using measurements collected at the Coastal Engineering Research Center's Field Research Facility located on the Atlantic Ocean. The data consisted of measured wave characteristics and accurate repetitive nearshore surveys which extended out to a depth of 30 ft (9 m). Ten unique data points were used in the evaluation with measured limit depths ranging from 18 to 21 (3.9 to 6.4 m). These depths were overpredicted by an average of 4.6 ft (1.4 m). This difference could be reduced to 1.3 ft (0.4 m) by adjusting the coefficients in the equation. A reasonable correlation was also obtained using a simple multiple of wave height.
dc.publisherAmerican Society of Civil Engineers
dc.titleField Data on Seaward Limit of Profile Change
dc.typeJournal Paper
dc.journal.volume111
dc.journal.issue3
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1985)111:3(598)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1985:;Volume ( 111 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record