Show simple item record

dc.contributor.authorRonald E. Nece
dc.date.accessioned2017-05-08T21:08:44Z
dc.date.available2017-05-08T21:08:44Z
dc.date.copyrightMay 1984
dc.date.issued1984
dc.identifier.other%28asce%290733-950x%281984%29110%3A2%28251%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40370
dc.description.abstractEffects of various geometry parameters on tidal flushing and internal circulation in small‐boat basins (marinas) of rectangular planform were determined in physical hydraulic models by means of a photographic technique incorporating the use of a photodensitometer. The schematic model marinas tested were scaled to have surface areas, water depths, and tide ranges comparable to “prototype” marinas in the Pacific Northwest: Results are presented in terms of spatial average tidal flushing (exchange) coefficients for each configuration tested, and by contour drawings of equal local per‐cycle exchange coefficients for a number of configurations, all at the same tide range. Emphasis is placed on planform geometry and aspect ratio, those variables over which designers may have most latitude in designing a marina for a specific site. Effects of basin length to width ratio are delineated for basins with typical single asymmetric entrances.
dc.publisherAmerican Society of Civil Engineers
dc.titlePlanform Effects on Tidal Flushing of Marinas
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue2
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1984)110:2(251)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1984:;Volume ( 110 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record