Show simple item record

dc.contributor.authorMana Patarapanich
dc.date.accessioned2017-05-08T21:08:44Z
dc.date.available2017-05-08T21:08:44Z
dc.date.copyrightMay 1984
dc.date.issued1984
dc.identifier.other%28asce%290733-950x%281984%29110%3A2%28171%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40365
dc.description.abstractWave reflection from a submerged horizontal plate in shallow water varies with the plate width to wavelength ratio and the submergence depth ratio. For a particular submergence, the reflection coefficient increases alternately to a peak value and then decreases to zero. The conditions for these maxima and zero reflections can be explained by examining the energy fluxes across the fluid regions around the plate. The total reflection consists of three components; those reflected from each end and that beneath the plate. The underflow is governed by the pressure difference between the two ends and can be either in a seaward or shoreward direction depending on the plate width to wavelength ratio. Superposition of reflections from the two edges can be additive or subtractive as their phases differ. The additive interference, reinforced by the seaward energy flux beneath the plate, produces the maximum reflection. On the other hand, when the two end reflections are out of phase and the energy flux beneath the plate is zero or shoreward, the incident wave energy is fully transmitted to the lee side.
dc.publisherAmerican Society of Civil Engineers
dc.titleMaximum and Zero Reflection from Submerged Plate
dc.typeJournal Paper
dc.journal.volume110
dc.journal.issue2
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1984)110:2(171)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1984:;Volume ( 110 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record