Show simple item record

dc.contributor.authorBing Li
dc.contributor.authorSudhakar A. Kulkarni
dc.date.accessioned2017-05-08T21:00:55Z
dc.date.available2017-05-08T21:00:55Z
dc.date.copyrightJanuary 2010
dc.date.issued2010
dc.identifier.other%28asce%290733-9445%282010%29136%3A1%2826%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35445
dc.description.abstractAn experimental and numerical investigation carried out on RC wide beam-column joints when subjected to seismic loads is reported within this paper. The experimental study was conducted by subjecting three full-scale wide exterior beam-column specimens to simulated seismic loads at the Nanyang Technological University of Singapore. Simulations of earthquake loadings were applied on to the specimens via quasistatic load reversals. Seismic performance analysis of the joints were based on the results obtained from the experiment in terms of their general behavior, hysteresis response, and the strain profiles of the longitudinal reinforcement within the specimens. These experimental results were then used to validate a three-dimensional (3D) nonlinear finite-element (FE) model. The behavior of the joints under the influence of critical influencing factors like column axial load, transverse beam, and beam bar anchorage ratio were also analyzed through the parametric studies carried out.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Behavior of Reinforced Concrete Exterior Wide Beam-Column Joints
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2010)136:1(26)
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record