Show simple item record

dc.contributor.authorDimitri V. Val
dc.contributor.authorLeonid Chernin
dc.date.accessioned2017-05-08T21:00:54Z
dc.date.available2017-05-08T21:00:54Z
dc.date.copyrightAugust 2009
dc.date.issued2009
dc.identifier.other%28asce%290733-9445%282009%29135%3A8%28896%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35428
dc.description.abstractTo date, attention of researchers concentrated mainly on the serviceability failure of corroded reinforced concrete (RC) beams caused by excessive cracking. However, cracking of the concrete cover and a reduction in the bond strength (which may result in slip between the corroding reinforcement and the concrete) also decrease the stiffness of RC beams. As a result of it, displacements of the RC beams increase and may exceed a limit value specified in a code, i.e., it has been noted that corrosion may also cause the serviceability failure due to excessive displacements. In this paper the effect of corrosion on deflections of RC beams and, subsequently, on the probability of serviceability failure due to excessive deflection is considered. A nonlinear finite element model is used to describe the structural behavior of RC beams with corroding reinforcement. Uncertainties associated with the model and available data are taken into account. Results show that an increase in deflections due to corrosion has a lesser effect on serviceability of RC beams than corrosion-induced cracking.
dc.publisherAmerican Society of Civil Engineers
dc.titleServiceability Reliability of Reinforced Concrete Beams with Corroded Reinforcement
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2009)135:8(896)
dc.treeJournal of Structural Engineering:;2009:;Volume ( 135 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record