Show simple item record

dc.contributor.authorYoung K. Ju
dc.contributor.authorSung-Chul Chun
dc.contributor.authorSang-Dae Kim
dc.date.accessioned2017-05-08T21:00:52Z
dc.date.available2017-05-08T21:00:52Z
dc.date.copyrightApril 2009
dc.date.issued2009
dc.identifier.other%28asce%290733-9445%282009%29135%3A4%28448%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35401
dc.description.abstractAs the number of high-rise buildings increases, the floor-to-floor height has been considered as a significant component due to limited city areas. To reduce the floor-to-floor height, a newly developed composite beam using asymmetric steel section with web opening was proposed and experimentally explored. Shear connectors are not used for the proposed composite beam. Instead, longitudinal shear strength is obtained through the bond strength of the interface between concrete and steel, and the bearing strength of the opened web area. In this paper, the flexural behavior of the proposed beam was assessed using the simple beam test. For comparison, a slim floor beam was tested. A bare steel beam was also tested to evaluate resistance under construction loads. The proposed system showed satisfactory horizontal shear resistance and good composite behavior.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexural Test of a Composite Beam Using Asymmetric Steel Section with Web Openings
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2009)135:4(448)
dc.treeJournal of Structural Engineering:;2009:;Volume ( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record