Show simple item record

dc.contributor.authorJohn W. Wallace
dc.contributor.authorKenneth J. Elwood
dc.contributor.authorLeonardo M. Massone
dc.date.accessioned2017-05-08T21:00:43Z
dc.date.available2017-05-08T21:00:43Z
dc.date.copyrightSeptember 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A9%281548%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35330
dc.description.abstractA large number of reinforced concrete buildings constructed prior to the mid-1970s in western North America rely on lightly reinforced, perforated, perimeter shear walls to resist earthquake-induced lateral forces. Although a substantial number of piers may exist, deformation demands can significantly exceed acceptable levels for plastic deformations published in common acceptance criteria such as FEMA 356. A shear-friction model is used to establish the ability of wall piers to support vertical loads after substantial loss of pier lateral-load capacity. The model results indicate that typical wall piers are capable of sustaining relatively large lateral drift ratios prior to loss of vertical load-carrying capacity, which is consistent with postearthquake observations. However, preliminary test results indicate that the drift capacity may be substantially less for poorly detailed walls, where axial failure occurred at a lateral drift ratio of approximately one percent.
dc.publisherAmerican Society of Civil Engineers
dc.titleInvestigation of the Axial Load Capacity for Lightly Reinforced Wall Piers
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:9(1548)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record