Show simple item record

dc.contributor.authorIn-Rak Choi
dc.contributor.authorHong-Gun Park
dc.date.accessioned2017-05-08T21:00:43Z
dc.date.available2017-05-08T21:00:43Z
dc.date.copyrightSeptember 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A9%281495%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35325
dc.description.abstractAn experimental study was performed to investigate the potential maximum ductility and energy dissipation capacity of steel plate walls with thin infill plates. Three specimens of a three-story steel plate wall were tested. A concentrically braced frame (CBF) and a moment-resisting frame (MRF) were also tested for comparison. To maximize the ductility and energy dissipation capacity of the steel plate walls, ductile details were used. The test parameters were the aspect ratio of the infill plate and the shear strength of the column. The steel plate walls exhibited much better ductility and energy dissipation capacity as compared to the CBF and MRF. This result indicates that unlike conventional reinforced concrete walls and CBFs, shear-dominated steel plate walls with thin infill plates possess excellent ductility capacity as well as high strength and stiffness. Based on the results of previous studies and the present study, the variations in the ductility and the energy dissipation capacity of the steel plate walls according to the design parameters were investigated.
dc.publisherAmerican Society of Civil Engineers
dc.titleDuctility and Energy Dissipation Capacity of Shear-Dominated Steel Plate Walls
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:9(1495)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record