Show simple item record

dc.contributor.authorJoseph Yura
dc.contributor.authorTodd Helwig
dc.contributor.authorReagan Herman
dc.contributor.authorChong Zhou
dc.date.accessioned2017-05-08T21:00:43Z
dc.date.available2017-05-08T21:00:43Z
dc.date.copyrightSeptember 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A9%281487%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35324
dc.description.abstractA closed form solution for elastic global buckling of twin girder systems interconnected with cross frames is derived. Current design specifications for such systems only consider individual girder buckling between cross frames. The solution, which is suitable for design specifications, was developed for a uniform moment loading condition. Finite-element analyses (FEAs) were used to verify the closed form solution and extend it to more practical loading conditions. FEA showed that the load height condition had only a minor effect for twin girders compared to the published effects on single girders. Both singly and doubly symmetric sections were studied and showed that the girder spacing and the in-plane moment of inertia of the girders are the principal variables controlling global buckling of twin girders. The number and size of the intermediate cross frames had little effect. A method for improving the global buckling capacity through the use of a partial top flange lateral bracing system is presented along with a design example.
dc.publisherAmerican Society of Civil Engineers
dc.titleGlobal Lateral Buckling of I-Shaped Girder Systems
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:9(1487)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record