Show simple item record

dc.contributor.authorC. Amadio
dc.contributor.authorO. De Luca
dc.contributor.authorC. Fedrigo
dc.contributor.authorM. Fragiacomo
dc.contributor.authorC. Sandri
dc.date.accessioned2017-05-08T21:00:42Z
dc.date.available2017-05-08T21:00:42Z
dc.date.copyrightAugust 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A8%281389%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35313
dc.description.abstractThe aim of the paper is to investigate the tensile strength of a glass pane with holes, such as that commonly used in glass-to-steel joints. Experimental tests have been conducted on a series of glass panes made of heat-strengthened and tempered glass. Since the collapse load markedly depends on the distance between the hole and the pane edge, specimens with different positions of the holes have been tested. In order to obtain reliable strength values, due to the high scatter of this quantity, five specimens have been tested for each type of pane, with a total number of 50 specimens. Interpolation curves have been proposed to predict the average failure load based on the distance between the hole and the pane edge. The experimental results have been compared with the numerical results carried out using finite-element codes obtaining good correspondence. A simple design procedure for glass-to-steel joints has then been proposed based on the evaluation of the stress intensity factor, for which some tables and interpolation functions are provided.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental and Numerical Analysis of a Glass-to-Steel Joint
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:8(1389)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record