Shake Table Testing of a Superelastic Shape Memory Alloy Response Modification Device in a Wood Shearwall
Abstract
Wood frame structures represent the vast majority of the housing stock in North America. These structures rely primarily on wood shear walls to resist seismic loads, and exhibit highly nonlinear behavior at relatively low loadings, which dissipates a large amount of energy. However, the highly nonlinear behavior also results in larger deformations and resulting structural and nonstructural damage. Supplemental energy dissipating devices have shown the potential to greatly reduce the amount of damage to wood frame structures during earthquakes. Numerous such devices have been developed using friction, viscoelastic, hysteretic, and fluid viscous dampers. This paper presents the results of a research study to design and test a supplemental energy dissipating device based on a superelastic shape memory alloy (SMA) in a full-scale wood shear wall on an earthquake shake table. SMA’s have never been applied for use as seismic protection in wood shear walls. The results from these shake table tests were compared to that for a regular wood shear wall subjected to the same suite of ground motions. The superelastic SMA-based device was found to significantly reduce the wood shear wall displacement, which in turn effectively eliminated damage to the wood shear wall with the device installed.