Show simple item record

dc.contributor.authorYangbo Chen
dc.contributor.authorMaria Q. Feng
dc.contributor.authorSerdar Soyoz
dc.date.accessioned2017-05-08T21:00:40Z
dc.date.available2017-05-08T21:00:40Z
dc.date.copyrightJuly 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A7%281235%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35293
dc.description.abstractMethods that identify structural component stiffness degradation by pre- and postevent low amplitude vibration measurements, based on a linear time-invariant (LTI) system model, are conceptually justified by examining the hysteresis loops the structural components experience in such vibrations. Two large-scale shake table experiments, one on a two-column reinforced concrete (RC) bridge bent specimen, and the other on a two-span three-bent RC bridge specimen were performed, in which specimens were subjected to earthquake ground motions with increasing amplitude and progressively damaged. In each of the damaged stages between two strong motions, low amplitude vibrations of the specimens were aroused, and the postevent component stiffness coefficients were identified by optimizing the parameters in a LTI model. The stiffness degradation identified is consistent with the experimental hysteresis, and could be quantitatively related to the capacity residual of the components.
dc.publisherAmerican Society of Civil Engineers
dc.titleLarge-Scale Shake Table Test Verification of Bridge Condition Assessment Methods
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:7(1235)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record