Show simple item record

dc.contributor.authorMurat Dicleli
dc.contributor.authorErtugrul Emre Calik
dc.date.accessioned2017-05-08T21:00:39Z
dc.date.available2017-05-08T21:00:39Z
dc.date.copyrightJuly 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A7%281215%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35291
dc.description.abstractThis paper presents a simple yet efficient physical theory model that can be used to simulate the inelastic cyclic axial force–axial deformation and axial force–transverse deformation relationships of steel braces. The model consists of a brace idealized as a pin ended member with a plastic hinge located at its midlength. Input parameters of the model are based only on the properties of the brace. The model combines analytical formulations based on the nonlinear behavior of the brace with some semiempirical normalized formulas developed on the basis of a study of available experimental data. The model realistically accounts for growth effect and degradation of buckling capacity due to Baushinger effects and residual kink present within the brace and it is broadly applicable to steel braces with various section types and slenderness ratios. It is observed that the analytically obtained axial force versus axial displacement as well as axial force versus transverse displacement hysteresis loops compare reasonably well with the experimental ones.
dc.publisherAmerican Society of Civil Engineers
dc.titlePhysical Theory Hysteretic Model for Steel Braces
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:7(1215)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record