Show simple item record

dc.contributor.authorDavid O. Prevatt
dc.contributor.authorScott D. Schiff
dc.contributor.authorJoshua S. Stamm
dc.contributor.authorAmolprasad S. Kulkarni
dc.date.accessioned2017-05-08T21:00:30Z
dc.date.available2017-05-08T21:00:30Z
dc.date.copyrightMarch 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A3%28489%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35206
dc.description.abstractIn the United States, currently there are three consensus test methods for determining the wind uplift capacity of mechanically-attached single-ply roofing membrane systems. Each is based upon a specific specimen size and static loading regime. However, few studies have examined the relationship, if any, of failure loads among these methods. This study was conducted to determine the effects of varying specimen sizes on the static wind uplift performance or failure loads of mechanically-attached single-ply roofing membranes. Full-scale wind uplift pressure tests were performed in three phases, using six specimen sizes, and three membrane materials. The results were used to determine the minimum acceptable specimen sizes to be used for testing. In Phase 1, fastener failure loads were monitored, while in Phases 2 and 3, the failure experiments were repeated without measuring fastener loads. A significant difference in the apparent failure loads occurs among different specimen sizes for the same membrane materials. The results suggest that correction factors are necessary for comparing tests on different test beds and that the performance of membranes in the test chamber may not produce the same results on full scale structures.
dc.publisherAmerican Society of Civil Engineers
dc.titleWind Uplift Behavior of Mechanically Attached Single-Ply Roofing Systems: The Need for Correction Factors in Standardized Tests
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:3(489)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record