Show simple item record

dc.contributor.authorRichard Sause
dc.contributor.authorBong-Gyun Kim
dc.contributor.authorMark R. Wimer
dc.date.accessioned2017-05-08T21:00:29Z
dc.date.available2017-05-08T21:00:29Z
dc.date.copyrightMarch 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A3%28384%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35194
dc.description.abstractThe behavior of I-shaped steel girders with flanges made from concrete-filled tubes is investigated experimentally, focusing on concrete-filled tubular flange girders (CFTFGs) in positive bending regions where the concrete-filled tube is the compression flange. The investigation included CFTFGs that are either composite or noncomposite with a concrete deck. For the composite CFTFGs, girders with rectangular tubes and either a flat web or a corrugated web are studied, and for the noncomposite CFTFGs, girders with round tubes and flat webs are studied. The objectives are: (1) to provide experimental data demonstrating the load carrying capability of CFTFGs and the advantages of CFTFGs over conventional I-girders; and (2) to verify the adequacy of analytical models by comparing experimental and analytical results. The experimental results demonstrate the improved lateral torsional buckling capacity of CFTFGs, and their capability to carry factored design loads under construction conditions and in the final constructed condition. The comparison between experimental and analytical results shows the adequacy of simple analytical models for CFTFGs.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Study of Tubular Flange Girders
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:3(384)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record