Show simple item record

dc.contributor.authorChuang-Sheng Yang
dc.contributor.authorRoberto T. Leon
dc.contributor.authorReginald DesRoches
dc.date.accessioned2017-05-08T21:00:24Z
dc.date.available2017-05-08T21:00:24Z
dc.date.copyrightOctober 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-9445%282008%29134%3A10%281619%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35134
dc.description.abstractThis paper presents the results from an experimental pushover test on a one-third-scale model of a special inverted-V-braced steel frame with zipper struts. Zipper elements are vertical elements added at the intersections of the braces above the first floor and designed to carry upward the unbalanced loads resulting from buckling of the braces. As far as the writers know, this is the first test on such a configuration that has been suggested as an alternate to conventional braced frames in the American Institute of Steel Construction seismic specification for many years. The model was pushed to a target roof drift ratio of
dc.publisherAmerican Society of Civil Engineers
dc.titlePushover Response of a Braced Frame with Suspended Zipper Struts
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2008)134:10(1619)
dc.treeJournal of Structural Engineering:;2008:;Volume ( 134 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record