Show simple item record

dc.contributor.authorChris P. Pantelides
dc.contributor.authorZihan Yan
dc.date.accessioned2017-05-08T21:00:21Z
dc.date.available2017-05-08T21:00:21Z
dc.date.copyrightSeptember 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9445%282007%29133%3A9%281288%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35106
dc.description.abstractA design-oriented confinement model for square and rectangular columns confined with bonded fiber-reinforced polymer (FRP) jackets, and shape-modified square and rectangular sections confined with posttensioned FRP shells is developed. The proposed design model for FRP-confined concrete columns is based on the bilinear four-parameter formulation by Richard and Abbott. The axial compressive strength of FRP-confined concrete is obtained using concrete plasticity theory based on the five parameter Willam and Warnke model. The ultimate axial strain of FRP-confined concrete is obtained from a strain-based approach depending on either passive or active confinement; the ultimate axial strain is based on the concepts of secant concrete modulus and strain dependent stiffness established by Pantazopoulou and Mills. Comparisons of the proposed stress-strain model with uniaxial compression experiments for columns with bonded FRP jackets or posttensioned FRP shells, performed by the writers and other researchers, show satisfactory agreement for the entire stress-strain curve.
dc.publisherAmerican Society of Civil Engineers
dc.titleConfinement Model of Concrete with Externally Bonded FRP Jackets or Posttensioned FRP Shells
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2007)133:9(1288)
dc.treeJournal of Structural Engineering:;2007:;Volume ( 133 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record