Show simple item record

dc.contributor.authorGordon P. Warn
dc.contributor.authorAndrew S. Whittaker
dc.contributor.authorMichael C. Constantinou
dc.date.accessioned2017-05-08T21:00:20Z
dc.date.available2017-05-08T21:00:20Z
dc.date.copyrightSeptember 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9445%282007%29133%3A9%281227%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35100
dc.description.abstractAn experimental study investigating the influence of lateral displacement on the vertical stiffness of elastomeric and lead–rubber seismic isolation bearings is summarized. Two identically constructed low-damping rubber and lead–rubber seismic isolation bearings were subjected to a series of tests with varying levels of combined lateral displacement and axial (compressive) loading to study this relationship. The results of these tests showed the vertical stiffness decreases with increasing lateral displacement for each bearing tested. Additionally, the vertical stiffness data are used to evaluate four formulations for the estimation of the vertical stiffness as a function of the lateral displacement. From this comparison, two formulations, one based on the Koh–Kelly two-spring model and the other on a piecewise linear relationship, showed good agreement with the experimental data over the wide range of lateral displacements considered in this study.
dc.publisherAmerican Society of Civil Engineers
dc.titleVertical Stiffness of Elastomeric and Lead–Rubber Seismic Isolation Bearings
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2007)133:9(1227)
dc.treeJournal of Structural Engineering:;2007:;Volume ( 133 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record