Show simple item record

dc.contributor.authorPeng Pan
dc.contributor.authorMakoto Ohsaki
dc.contributor.authorHiroshi Tagawa
dc.date.accessioned2017-05-08T21:00:19Z
dc.date.available2017-05-08T21:00:19Z
dc.date.copyrightAugust 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9445%282007%29133%3A8%281176%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35092
dc.description.abstractThe purpose of this paper is to show that the performance of a structural component is drastically improved utilizing shape optimization considering inelastic responses. Optimal flange shapes are found as an example for an H-beam to show that the energy dissipation capacity is significantly improved by shape optimization. The forced displacement is given at the free end of the cantilever beam so that the average deformation angle reaches the specified value. The constraint is given for the maximum equivalent plastic strain at the welded section. Global optimal solutions are searched by a heuristic approach called simulated annealing, which is successfully combined with a commercial finite-element analysis code ABAQUS for elastoplastic analysis. It is shown in the examples that the maximum plastic strains near the welded section are reduced and the plastic deformation is widely distributed around the reduced section of the optimal solution; thus, allowing large energy dissipation under small maximum plastic strain. The results show the advantage of the optimal shape over the conventional circular cut.
dc.publisherAmerican Society of Civil Engineers
dc.titleShape Optimization of H-Beam Flange for Maximum Plastic Energy Dissipation
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2007)133:8(1176)
dc.treeJournal of Structural Engineering:;2007:;Volume ( 133 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record