Show simple item record

dc.contributor.authorGustavo J. Parra-Montesinos
dc.contributor.authorPraveen Chompreda
dc.date.accessioned2017-05-08T21:00:09Z
dc.date.available2017-05-08T21:00:09Z
dc.date.copyrightMarch 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9445%282007%29133%3A3%28421%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/35004
dc.description.abstractThe behavior of fiber-reinforced cement composite (FRCC) flexural members under large displacement reversals was experimentally evaluated. Emphasis was placed on estimating the displacement capacity and shear strength of members constructed with strain-hardening FRCC materials. Two types of fibers were used: Ultrahigh molecular weight polyethylene fibers and steel hooked fibers in volume fractions ranging between 1.0 and 2.0%. The primary experimental variables were: (1) fiber type and volume fraction; (2) type of cement-based matrix (concrete or mortar); (3) average shear stress demand at flexural yielding; and (4) shear resistance provided through hoops versus total shear demand. All specimens constructed with a strain-hardening FRCC, with or without web reinforcement, exhibited drift capacities of at least 4.0%. A shear stress level of
dc.publisherAmerican Society of Civil Engineers
dc.titleDeformation Capacity and Shear Strength of Fiber-Reinforced Cement Composite Flexural Members Subjected to Displacement Reversals
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2007)133:3(421)
dc.treeJournal of Structural Engineering:;2007:;Volume ( 133 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record