Show simple item record

dc.contributor.authorKee-Dong Kim
dc.contributor.authorMichael D. Engelhardt
dc.date.accessioned2017-05-08T21:00:07Z
dc.date.available2017-05-08T21:00:07Z
dc.date.copyrightFebruary 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9445%282007%29133%3A2%28176%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/34974
dc.description.abstractThis paper presents the development of a nonprismatic beam element for modeling the elastic behavior of steel beams with reduced beam section (RBS) connections. The accuracy of this element is evaluated by comparisons with finite element solutions. A simplified approach is also suggested, which uses a prismatic beam element to model beams with RBS connections. The effect of the RBS on the elastic stiffness of beams and frames is then investigated through a series of parametric studies, and by analysis of 3-, 9-, and 20-story moment frames. With a 50% flange reduction, the increase in maximum story drift ranges from 6 to 8% for typical moment frame buildings. With a 40% reduction, the increase in maximum story drift is 4.5–6%.
dc.publisherAmerican Society of Civil Engineers
dc.titleNonprismatic Beam Element for Beams with RBS Connections in Steel Moment Frames
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2007)133:2(176)
dc.treeJournal of Structural Engineering:;2007:;Volume ( 133 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record