Show simple item record

dc.contributor.authorXiaoli Tong
dc.contributor.authorChristopher Y. Tuan
dc.contributor.authorJianping Yang
dc.contributor.authorJiaqi Zhang
dc.contributor.authorQingrui Yue
dc.date.accessioned2017-05-08T21:00:06Z
dc.date.available2017-05-08T21:00:06Z
dc.date.copyrightDecember 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9445%282007%29133%3A12%281783%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/34960
dc.description.abstractFatigue cracks were found on a series of end-coped crane runway girders after 14 years of service in a steel mill building in China. Two typical crane runway girders with different spans were studied in this paper. Finite element analyses were conducted to investigate the stress concentration at the coped ends. Analytical results showed the stress concentration effect was highly localized and the stress concentration factor decreased with increasing cope radius and decreasing total depth. The analytical results agreed well with the field measured data. Fatigue tests were conducted to determine the fatigue strength using eight 1/5-scaled end-coped girder specimens. Based on the analytical results and limited test data, the fatigue strength for a maximum principal stress range of
dc.publisherAmerican Society of Civil Engineers
dc.titleFatigue Strength of End-Coped Crane Runway Girders
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2007)133:12(1783)
dc.treeJournal of Structural Engineering:;2007:;Volume ( 133 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record