Show simple item record

dc.contributor.authorBernard Adam
dc.contributor.authorIan F. Smith
dc.date.accessioned2017-05-08T21:00:06Z
dc.date.available2017-05-08T21:00:06Z
dc.date.copyrightDecember 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-9445%282007%29133%3A12%281752%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/34957
dc.description.abstractThis paper focuses on the study of tensegrity active control in situations of partially defined loading and damage events. Self-diagnosis and self-repair methodologies are proposed and validated experimentally on a full-scale active tensegrity structure. Self-diagnosis involves load identification and damage location. The response of the structure to a load and damage is measured and compared with the response of the structure to candidate solutions for load and damage. Self-diagnosis solutions result in sets of candidate solutions for loads and damage. These solutions are employed to compute control commands of shape control and self-repair for the structure. Self-repairing control commands increase stiffness and decrease stresses with respect to the damaged state. Self-repairing control commands are computed using a multiobjective approach. The application of a control command results in self-stress modifications by changing the length of active struts. The proposed methodologies are attractive for tensegrity active control in situations of partially defined loading and damage events.
dc.publisherAmerican Society of Civil Engineers
dc.titleSelf-Diagnosis and Self-Repair of an Active Tensegrity Structure
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(2007)133:12(1752)
dc.treeJournal of Structural Engineering:;2007:;Volume ( 133 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record