Journal of Energy Resources Technology: Recent submissions
Now showing items 381-400 of 3450
-
Effect of the J-Shaped Wind Turbine Airfoil Opening Ratio and Thickness on the Performance of Symmetrical Airfoils
(The American Society of Mechanical Engineers (ASME), 2022)In this work, the effect of the inner opening ratio on the J-shaped airfoils aerodynamic performance was studied and documented for symmetrical airfoils. Three different airfoil thicknesses were investigated: small (NACA0008), ... -
Measurement and Analysis of Power Losses in Sintered Cores for Power Electronic Devices in Renewable Energy Systems
(The American Society of Mechanical Engineers (ASME), 2021)Measurement of power losses in inductive devices in highly efficient power electronic systems is crucial for choosing appropriate components. A calorimetric method for measuring power losses below 10 W is presented in the ... -
Identifying the Market Scenarios for Supercritical CO2 Power Cycles
(The American Society of Mechanical Engineers (ASME), 2021)The technology management methods and the “technology foresight” allow organizations and stakeholders in a particular market/sector to create an advantage out of technological breakthroughs, sustain and expand technological ... -
Erratum: “Computational Study of 16 KWth Furnace Cofired Using Pulverized Bituminous Coal and Liquified Petroleum Gas Operated in Un-Staged and Air-Staged Conditions” [ASME J. Energy Resour. Technol., 143(8), p. 082102
(The American Society of Mechanical Engineers (ASME), 2021)In the original publication, the Acknowledgment section was excluded from the article and should have been added after the Conclusion section. The following is the Acknowledgment section for the published article. -
Multi-Phase Rate Transient Behaviors of the Multi-Fractured Horizontal Well With Complex Fracture Networks
(The American Society of Mechanical Engineers (ASME), 2022)Complex fracture networks (CFN) provide flow channels and significantly affect well performance in unconventional reservoirs. However, traditional rate transient analysis (RTA) models barely consider the effect of CFN on ... -
Assessment of Noise Signature for a Cavitating Centrifugal Pump
(The American Society of Mechanical Engineers (ASME), 2021)In recent days, sophisticated instruments have emerged to obtain an online measurement of performance parameters from centrifugal pump of different kinds and the signals can be directed to the hands of pump users through ... -
A Review on Well Integrity Issues for Underground Hydrogen Storage
(The American Society of Mechanical Engineers (ASME), 2021)Renewable energy production is limited by the fluctuations limiting their application. Underground hydrogen storage (UHS) is one possible alternative to reduce the gap between supply and demand by storing the energy converted ... -
Optimum Torrefaction Range for Macaw Husks Aiming Its Use as a Solid Biofuel
(The American Society of Mechanical Engineers (ASME), 2021)Biomass feedstock is broadly available in many countries, and a significant amount of residual biomass comes from agriculture and forest crops. This study aims to identify a consistent criteria for optimize Macaw husks ... -
State of the art of Windthermal Turbines: A Systematic Scoping Review of Direct Wind-to-Heat Conversion Technologies
(The American Society of Mechanical Engineers (ASME), 2021)Windthermal turbines convert wind directly into thermal energy. Albeit it is an uncharted field of research, the overall system efficiency and costs of fully developed windthermal turbines are promising -
Technical and Economic Evaluation on the Integrated Heating System With Coupled Heat Pump and Backpressure Turbine
(The American Society of Mechanical Engineers (ASME), 2021)The increasing depletion of fossil energy and the gradual aggravation of environmental pollution have increased the necessity of renewable energy applications. However, the intermittent characteristics of renewable energy ... -
Numerical Simulation and Optimization of CO2-Enhanced Gas Recovery in Homogeneous and Vertical Heterogeneous Reservoir Models
(The American Society of Mechanical Engineers (ASME), 2022)CO2-enhanced gas recovery (CO2-EGR) is a promising, environment-friendly technology to produce more natural gas from depleted reservoirs and simultaneously sequester CO2. The subsurface flow in the heterogeneous reservoir ... -
Screening of Lost Circulation Materials for Geothermal Applications: Experimental Study at High Temperature
(The American Society of Mechanical Engineers (ASME), 2021)This study presents a laboratory experimental research to determine the characteristics of lost circulation materials (LCMs) capable of addressing thermal degradation, providing bridging and sealing in geothermal conditions. ... -
Comprehensive Effects of Polymer Flooding on Oil–Water Relative Permeabilities
(The American Society of Mechanical Engineers (ASME), 2021)Many reports have indicated that, in contrast to waterflooding, oil–water relative permeabilities in polymer flooding are influenced by the polymer properties, such as adsorption and viscoelasticity. Long-term injected ... -
Production Characteristics, Evaluation, and Prediction of CO2 Water-Alternating-Gas Flooding in Tight Oil Reservoir
(The American Society of Mechanical Engineers (ASME), 2021)It is complex and obviously different for the production characteristics of CO2 water-alternating-gas (WAG) flooding in tight reservoir and influenced by quite a few factors. Therefore, the prediction of oil production is ... -
Comparison of Random Forest and Neural Network in Modeling the Performance and Emissions of a Natural Gas Spark Ignition Engine
(The American Society of Mechanical Engineers (ASME), 2022)Machine learning (ML) models can accelerate the development of efficient internal combustion engines. This study assessed the feasibility of data-driven methods toward predicting the performance of a diesel engine modified ... -
Skeletal Kinetic Modeling for the Combustion of Endothermic Hydrocarbon Fuel in Hypersonic Vehicle
(The American Society of Mechanical Engineers (ASME), 2021)Chemical kinetic mechanism plays a vital role in the deep learning of reacting flow in practical combustors, which can help obtain many details of the combustion process. In this paper, a surrogate model and a skeletal ... -
Combustion Performance Investigation of Aviation Kerosene (RP-3) on a Compression Ignition Diesel Engine Under Various Loads
(The American Society of Mechanical Engineers (ASME), 2021)The combustion performance of a compression ignition (CI) four-stroke aviation engine fueled with pure kerosene No. 3 rocket propellant (RP-3) was experimentally investigated for comparison with diesel. Pilot injection and ... -
Performance, Combustion, and Emission Characteristics of a Common Rail Direct Injection Diesel Engine Fueled by Diesel/n-Amyl Alcohol Blends With Exhaust Gas Recirculation Technique
(The American Society of Mechanical Engineers (ASME), 2021)Biofuels are considered as one of the best viable and inexhaustible alternatives to conventional diesel fuel. Alcohols have become very important and popular in the present scenario due to their peculiar fuel properties ... -
Trade-Off Study on Economy and Environmental Aspects of a Dual-Fuel Diesel Engine Using Diesel Additive and Producer Gas
(The American Society of Mechanical Engineers (ASME), 2021)Experiments are performed on a diesel engine working in a single-fuel mode using fossil diesel (FD) as well as 5% and 10% (v/v) di-ethyl ether (DEE) additives with FD as fuels as well as in dual-fuel mode using the ... -
Biosynthesis of Amyl Alcohol From Scenedesmus quadricauda Microalgae for Light Commercial Vehicle Compression Ignition Engine Using Prediction Models
(The American Society of Mechanical Engineers (ASME), 2021)Third-generation feedstocks and its constituent biofuels have shown promising results in the light of sustainable production and as a feasible fuel source for internal combustion (IC) engines. Hence, in this study, a ...