Journal of Energy Resources Technology: Recent submissions
Now showing items 2941-2960 of 3450
-
Analysis of the Channeling Effect in Variable Porosity Media
(The American Society of Mechanical Engineers (ASME), 1986)A theoretical solution of the channeling effect is presented. The details of the channeling production are investigated in detail and an approximate method for obtaining the temperature distribution ... -
Some Factors Influencing Iceberg Scour Estimates
(The American Society of Mechanical Engineers (ASME), 1986)The phenomenon of seabed scouring by icebergs is a major threat to buried structures on the Canadian East Coast and is of immediate concern to the petroleum operators. The design of a suitable ... -
Outward Melting in a Cylindrical Annulus
(The American Society of Mechanical Engineers (ASME), 1986)A two-dimensional numerical simulation of outward melting process of a phase change material, n-octadecane, contained in a horizontal cylindrical annulus has been performed with a finite-difference ... -
Development of a Scale Model for the Dynamic Interaction of a Pile in Clay
(The American Society of Mechanical Engineers (ASME), 1986)Similitude theory is used to develop a scale model for determining the dynamic response properties of a single pile embedded in over-consolidated clay. The basis for the design is a full-scale ... -
The Effect of Moisture on the Structural Stability of a Coal Cavity
(The American Society of Mechanical Engineers (ASME), 1986)The drying of coal and the associated thermal and moisture-induced stresses are examined with a numerical model to estimate the rate of surface regression in underground coal gasification. The ... -
Damage Detection in Offshore Platforms Using Vibration Information
(The American Society of Mechanical Engineers (ASME), 1986)Damage detection based on changes in dynamic characteristics is considered for eight-legged k-braced steel offshore oil and gas production towers. Both experimental and analytical results are ... -
Experiments on an Electromagnetic Capsule Pump
(The American Society of Mechanical Engineers (ASME), 1986)A simple electromagnetic pump, based on the principle of linear induction motor (LIM), has been developed by researchers at the University of Missouri-Columbia for use in hydraulic capsule ... -
Predicting Compositional Two-Phase Flow Behavior in Pipelines
(The American Society of Mechanical Engineers (ASME), 1986)A computational algorithm for predicting pressure and temperature profiles for compositional two-phase flow in pipelines has been developed. The algorithm is based on the coupling of the momentum ... -
Frictional Flow Properties of Coal-Oil Slurries at Low Reynolds Number
(The American Society of Mechanical Engineers (ASME), 1986)The pipe friction factor (f ) and the pressure loss coefficient for a 90-deg EL (K90 ) were measured for coal-oil slurries at Reynolds numbers less than 100. A range of mass fractions (0 ... -
Collapse of Imperfect Tubulars
(The American Society of Mechanical Engineers (ASME), 1986)The nonlinear response and eventual collapse of a cylinder loaded by resultant external pressure and axial load is analyzed. The cross-sectional description of the cylinder is sufficiently general ... -
Laboratory Investigation of Bit Bearing Temperatures in Rotary Drilling
(The American Society of Mechanical Engineers (ASME), 1986)One mechanism of bit failure in geothermal drilling is thought to be directly related to the overheating of the bearings. High temperatures alter the microstructure of the bearing material and ... -
A Study of Rock-Bit Interaction and Wellbore Deviation
(The American Society of Mechanical Engineers (ASME), 1986)An overall analysis of wellbore deviation is presented. A theoretical study in side-cutting mechanism and side-cutting ability of roller cone bits is described. A full-scale drilling rig and a ... -
Pressure-Resistant Plane Disk Viewports From Allyl Diglycol Carbonate Plastic for Hyperbaric Chambers
(The American Society of Mechanical Engineers (ASME), 1986)Acrylic plastic viewports have been used for over 40 yr in pressure vessels for human occupancy without any catastrophic failure resulting in a loss of life. However, there are special ... -
Simulation of Transient Two-Phase Flow in Pipelines
(The American Society of Mechanical Engineers (ASME), 1986)The laws of conservation of mass and linear momentum were applied to a two-phase mixture to formulate a mathematical model which simulates isothermal, transient two-phase flow of gas and liquid ... -
Two-Phase Flow in Piping Components
(The American Society of Mechanical Engineers (ASME), 1986)Two-phase and single-phase pressure drop data were obtained for flow in horizontal 5.08-cm-dia pipe and piping components that included: a 9.14-m straight section of pipe; a gate valve; an ... -
Flash-Butt Welding of Large-Diameter Oil and Gas Pipelines
(The American Society of Mechanical Engineers (ASME), 1986)Interest in developing a high-production automatic joining method for quality offshore pipelines led to full-scale evaluation of the flash-butt welding process. During the past five years, two ... -
Pipeline Monitoring
(The American Society of Mechanical Engineers (ASME), 1986)TransCanada PipeLines Limited has established a comprehensive program for in-line inspection of its extensive pipeline system. TransCanada has been developing inspection tools since 1968 and currently ... -
The Combustion of Lean Mixtures of Methane and Air—A Kinetic Investigation
(The American Society of Mechanical Engineers (ASME), 1986)The combustion of lean mixtures of methane, representing natural gas, in air is examined analytically employing a detailed chemical kinetic scheme involving 14 species and made up of 32 reaction ... -
An Investigation of the Volatilization of Oil Sand Surfaces When Subjected to Parallel Hot Gaseous Streams
(The American Society of Mechanical Engineers (ASME), 1986)Preshaped rectangular sand slabs were subjected to hot oxidizing streams. The rate of mass loss due to fluid volatilization at constant stream temperature was established and correlated with ... -
Scale-up Technique of Slurry Pipelines—Part 1: Turbulence Modeling
(The American Society of Mechanical Engineers (ASME), 1986)A kinetic energy turbulence model is proposed for the flow simulation and scale-up of slurry pipelines (in Part 1). The numerical integration is performed by using a modified finite volume ...