Journal of Energy Resources Technology: Recent submissions
Now showing items 1741-1760 of 3450
-
Flow Diverting for Reducing Wellbore Erosion in Gas Drilling Shale Gas Wells
(The American Society of Mechanical Engineers (ASME), 2013)With the downturn in natural gas prices, it is vitally important to reduce the cost of drilling shale gas wells. Gaspercussion drilling has been recently employed in shale gas field development. It increases footage capacity ... -
Driving on Renewables—On the Prospects of Alternative Fuels up to 2050 From an Energetic Point of View in European Union Countries
(The American Society of Mechanical Engineers (ASME), 2013)The core objective of this paper is to investigate the perspectives of “renewable fuels†mainly from an energetic pointofview in a dynamic framework until 2050 in comparison to fossil fuels. In addition, the impact on ... -
Influence of Boiler Load Swing Rates on Response of Drum Water Level
(The American Society of Mechanical Engineers (ASME), 2013)In this study, swing rates of drum boilers are investigated in regard to maintaining proper drum level limits. The nonlinear boiler model employed in study investigations was validated by comparing simulated results against ... -
An Artificial Neural Network in Short Term Electrical Load Forecasting of a University Campus: A Case Study
(The American Society of Mechanical Engineers (ASME), 2013)This paper presents an artificial neural network (ANN) for forecasting the shortterm electrical load of a university campus using real historical data from Colorado State University. A spatiotemporal ANN model with multiple ... -
Fracture Height Containment in the Stimulation of Oriskany Formation
(The American Society of Mechanical Engineers (ASME), 2013)The Oriskany sandstone formation has been a prolific producer of natural gas in the Appalachian basin since 1930s. Lot of production wells have been converted to gas storage wells for the ease of operation. Natural gas ... -
An Al/Zr Based Clay Stabilizer for High pH Applications
(The American Society of Mechanical Engineers (ASME), 2013)Sandstone formations are exposed to a variety of high pH fluids, including: hydraulic fracturing using high pH borate gels, alkalinebased chemical enhanced oil recovery (EOR) methods, waterbased drilling fluids, and cementing ... -
Review of World Urban Heat Islands: Many Linked to Increased Mortality
(The American Society of Mechanical Engineers (ASME), 2013)Medical and health researchers have shown that fatalities during heat waves are most commonly due to respiratory and cardiovascular diseases, primarily from heat's negative effect on the cardiovascular system. In an attempt ... -
Prospects for Implementation of Thermoelectric Generators as Waste Heat Recovery Systems in Class 8 Truck Applications
(The American Society of Mechanical Engineers (ASME), 2013)With the rising cost of fuel and increasing demand for clean energy, solidstate thermoelectric (TE) devices are an attractive option for reducing fuel consumption and CO2 emissions. Although they are reliable energy ... -
Superimposition of Elementary Thermodynamic Cycles and Separation of the Heat Transfer Section in Energy Systems Analysis
(The American Society of Mechanical Engineers (ASME), 2013)In a wide variety of thermal energy systems, the high integration among components derives from the need to correctly exploit all the internal heat sources by a proper matching with the internal heat sinks. According to ... -
A Stochastic Upscaling Analysis for Carbonate Media
(The American Society of Mechanical Engineers (ASME), 2013)Carbonate rocks have welldeveloped macropore and micropore systems, it is necessary to study the dual pore characteristics in carbonate rocks. In this paper, based on the original macropore network and micropore network, ... -
Factors Affecting Hydraulically Fractured Well Performance in the Marcellus Shale Gas Reservoirs
(The American Society of Mechanical Engineers (ASME), 2013)Development of shale gas reservoirs has become an integral part of the North American gas supply. The Marcellus shale reservoir contains large untapped natural gas resources and its proximity to high demand markets along ... -
Infill Drilling Potential in Tight Gas Reservoirs
(The American Society of Mechanical Engineers (ASME), 2013)Many operators of tight gas reservoir fields are interested in determining the infill well potential in these fields. Over drilling may prove to be uneconomical; whereas, under drilling would leave unexplored reserves under ... -
Performance Analysis and Working Fluid Optimization of a Cogenerative Organic Rankine Cycle Plant
(The American Society of Mechanical Engineers (ASME), 2013)The paper presents the results of a research regarding the application of cogeneration plants, based on organic rankine cycle (ORC), fed with wood residuals. In the first part of the paper an energy audit of the companies ... -
Biogas Combustion in Premixed Flames or Electrochemical Oxidation in SOFC: Exergy and Emission Comparison
(The American Society of Mechanical Engineers (ASME), 2013)In the future energy pathway, characterized by flexibility of technologies and fuels, biogas could represent an alternative to conventional natural gas in feeding multiple types of technologies, both traditional thermal ... -
Experimental Analysis of CO2 Injection on Permeability of Vuggy Carbonate Aquifers
(The American Society of Mechanical Engineers (ASME), 2013)Reactions of CO2 with formation rock may lead to an enhancement in the permeability due to rock dissolution, or damage (reduction in the core permeability) because of the precipitation of reaction products. The reaction ... -
Fundamental Study of Spray and Partially Premixed Combustion of Methane/Air Mixture
(The American Society of Mechanical Engineers (ASME), 2013)This study presents fundamentals of spray and partially premixed combustion characteristics of directly injected methane in a constant volume combustion chamber (CVCC). The constant volume vessel is a cylinder with inside ... -
A Novel Combined Particle Swarm Optimization and Genetic Algorithm MPPT Control Method for Multiple Photovoltaic Arrays at Partial Shading
(The American Society of Mechanical Engineers (ASME), 2013)The output characteristics of multiple photovoltaic (PV) arrays at partial shading are characterized by multiple steps and peaks. This makes that the maximum power point tracking (MPPT) of a large scale PV system becomes ... -
Optimization of Waterflooding Performance in a Layered Reservoir Using a Combination of Capacitance Resistive Model and Genetic Algorithm Method
(The American Society of Mechanical Engineers (ASME), 2013)Managing oil production from reservoirs to maximize the future economic return of the asset is an important issue in petroleum engineering. In many applications in reservoir modeling and management, there is a need for ... -
Modeling and Analysis of Drillstring Vibration in Riserless Environment
(The American Society of Mechanical Engineers (ASME), 2013)Riserless drilling poses numerous operational challenges that adversely affect the efficiency of the drilling process. These challenges include increased torque and drag, buckling, increased vibration, poor hole cleaning, ... -
Model Development of Torsional Drillstring and Investigating Parametrically the Stick Slips Influencing Factors
(The American Society of Mechanical Engineers (ASME), 2013)Drillstring vibration is one of the limiting factors maximizing drilling performance. Torsional vibrations/oscillations while drilling is one of the sever types of drillstring vibration which deteriorates the overall ...