Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 3841-3860 of 5605
-
A Modified ARTMAP Network, With Applications to Scheduling of a Robot-Vision-Tracking System
(The American Society of Mechanical Engineers (ASME), 1996)The use of a robot-vision-tracking system to efficiently process different types of objects presented randomly on a moving conveyor belt requires the system to schedule pick and place operations ... -
Modeling and Control of Backlash in the Drive Mechanism of a Radially Rotating Compliant Beam
(The American Society of Mechanical Engineers (ASME), 1996)The exclusion of the dynamic characteristics of indirect drives, from the controller design, has often led to a degraded performance in precision servomechanisms. In this study, the adverse ... -
Modeling and Designing a Variable-Displacement Open-Loop Pump
(The American Society of Mechanical Engineers (ASME), 1996)This study develops closed-form equations that may be used to guide the up-front design of a variable-displacement pump. In particular, the initial design of the control actuation system and ... -
Adaptive Control of an Industrial Robot Retrofitted With an Open-Architecture Controller
(The American Society of Mechanical Engineers (ASME), 1996)A PUMA 560 industrial robot has been retrofitted with an open-architecture controller. An adaptive control scheme that incorporates actuator dynamics has been implemented on this robot testbed. ... -
Parametric Control of Conservative Mechanical Systems
(The American Society of Mechanical Engineers (ASME), 1996)Parametric excitation is used to control the vibration of a conservative mechanical system. The excitation is varied according to a quadratic, state feedback, control law. If the system has ... -
A New High Supply Pressure Pneumatic Flapper-Nozzle With Linear Behavior
(The American Society of Mechanical Engineers (ASME), 1996)In order to optimize the devices which incorporate flapper-nozzle systems, the behavior of these systems must be completely modeled theoretically. However, the complexity of the flow between the ... -
Automated Fault Tree Analysis for Hydraulic Systems
(The American Society of Mechanical Engineers (ASME), 1996)Fault Tree Analysis is a commonly used technique for assessing the reliability and safety of engineering systems at the design stage but it is tedious and time-consuming to apply. A reconfigurable ... -
On-Line Controller Implementation for Attenuation of Synchronous and Transient Rotor Vibration
(The American Society of Mechanical Engineers (ASME), 1996)A study is presented in which the vibrations of a rotor are controlled under both synchronous and transient conditions. A Fourier decomposition of the rotor vibration during successive synchronous ... -
Constraint Formulation for Invariant Hybrid Position/Force Control of Robots
(The American Society of Mechanical Engineers (ASME), 1996)This paper focuses on the formulation of constraints for hybrid position/force control of robots. Since the noninvariant nature of the classical approach based on orthogonality of some subspaces ... -
Time-Energy Optimal Control of Articulated Systems With Geometric Path Constraints
(The American Society of Mechanical Engineers (ASME), 1996)The motions of articulated systems along specified paths are optimized to minimize a time-energy cost function. The optimization problem is formulated is a reduced two-dimensional state space and ... -
Erratum: “Measures of Robustness for Uncertain Time-Delay Linear Systems” [ASME Journal of Dynamic Systems, Measurement, and Control, 1995, 117(4), pp. 633-635]
(The American Society of Mechanical Engineers (ASME), 1996) -
Model Based Statistical Process Control for Continuous Systems
(The American Society of Mechanical Engineers (ASME), 1996)Statistical process control (SPC) is a set of methodologies for signaling the presence of undesired sources of variation in manufacturing processes. SPC methods for continuous processes may be ... -
Near-Minimum Time Feedback Controller for Manipulators Using On-Line Time Scaling of Trajectories
(The American Society of Mechanical Engineers (ASME), 1996)A near-minimum time feedback controller for robotic manipulators with bounded input torques is developed. Since the bang-bang input torque obtained from the timeoptimal control theory leaves little ... -
Experimental Identification of a Flow Orifice Using a Neural Network and the Conjugate Gradient Method
(The American Society of Mechanical Engineers (ASME), 1996)An experimental approach of using a neural network model to identifying a nonlinear non-pressure-compensated flow valve is described in this paper. The conjugate gradient method with Polak-Ribiere ... -
Dynamic Response of a Servovalve Controlled Hydraulic Motor Driven Centrifugal Pump
(The American Society of Mechanical Engineers (ASME), 1996)A servovalve controlled hydraulic motor driven centrifugal pump was dynamically modelled using linearized analysis. The expressions for the system gain, natural frequency, and damping ratio in ... -
Iterative LQG Controller Design Through Closed-Loop Identification
(The American Society of Mechanical Engineers (ASME), 1996)This paper presents an iterative LQG controller design approach for a linear stochastic system with an uncertain openloop model and unknown noise statistics. This approach consists of closed-loop ... -
Frequency Domain Structural System Identification by Observability Range Space Extraction
(The American Society of Mechanical Engineers (ASME), 1996)This paper presents the Frequency Domain Observability Range Space Extraction (FORSE) identification algorithm. FORSE is a singular value decomposition based identification algorithm which constructs ... -
A New Adaptive Robot Controller Taking Account of Motor Dynamics
(The American Society of Mechanical Engineers (ASME), 1996)This paper presents a new adaptive controller designed for rigid-body robots including motor dynamics. Recently, the effects of motor dynamics have attracted attention from a number of researchers. ... -
ER Shear Characteristics: Volume Fraction, Shear Rate, Time Response
(The American Society of Mechanical Engineers (ASME), 1996)Electro-stress and electron-hydraulic time delay are investigated in shear mode tests on ERF (electro-rheological fluid). These parameters are examined using a concentric, Couette clutch operating ... -
Axial Force Stabilization of Transverse Vibration in Pinned and Clamped Beams
(The American Society of Mechanical Engineers (ASME), 1996)An axial force stabilizes the transverse vibration of a beam with pinned and/or clamped boundary conditions. The nonlinearly coupled, longitudinal and transverse equations of motion of the beam ...