Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 3761-3780 of 5605
-
On the Tracking Control of Differentially Steered Wheeled Mobile Robots
(The American Society of Mechanical Engineers (ASME), 1997)Fundamental tracking control algorithms of a differentially steered wheeled mobile robot with two conventional driven wheels are studied through analyzing the robot’s inherent kinematics. This ... -
Nonlinear Inverse and Predictive End Point Trajectory Control of Flexible Macro-Micro Manipulators
(The American Society of Mechanical Engineers (ASME), 1997)This paper presents a new approach to end-point trajectory control of flexible macro-micro manipulator based on nonlinear inversion and predictive control techniques. In this approach, precise ... -
Implementation of Sensory Feedback and Trajectory Tracking in Active Telemanipulation Systems
(The American Society of Mechanical Engineers (ASME), 1997)This paper presents an approach to the implementation of sensory feedback in a robotic telemanipulation system. The system considered here consists of kinematically similar master-slave robotic ... -
The Effective Fluid Bulk-Modulus Within a Hydrostatic Transmission
(The American Society of Mechanical Engineers (ASME), 1997)In this study, the fluid bulk-modulus within a hydrostatic transmission is examined. Specifically, a method for measuring the effective fluid bulk-modulus is proposed based upon the definition ... -
An Approach to Telerobotic Manipulations
(The American Society of Mechanical Engineers (ASME), 1997)This article introduces three areas of study: 1 telefunctioning; 2 a control method for producing telefunctioning; and 3 an analysis of human-robot interaction when telefunctioning governs the ... -
Sliding Mode Control With Perturbation Estimation (SMCPE) and Frequency Shaped Sliding Surfaces
(The American Society of Mechanical Engineers (ASME), 1997)Sliding Mode Control with Perturbation Estimation (SMCPE) is a recent control routine which steers uncertain dynamic systems with disturbances to follow a desired trajectory. It eliminates the ... -
Use of Convex Hulls for Plant Template Approximation in QFT Design
(The American Society of Mechanical Engineers (ASME), 1997)A method is presented for the rapid approximation of plant templates for the Quantitative Feedback Theory (QFT) control design methodology. The approach is based on the convex hull of the ... -
Design and Evaluation of Frequency Weighted LQG—Maximum Entropy Controllers on an Experimental Truss Structure
(The American Society of Mechanical Engineers (ASME), 1997)This paper will discuss the experimental evaluation of a structural control system designed using a combination of Frequency Weighted LQG and Maximum Entropy. The experimental implementation was ... -
On the Linear Quadratic Optimal Systems Design in the Frequency Domain
(The American Society of Mechanical Engineers (ASME), 1997)By frequency-domain approach, a synthesis methodology of single-input-single-output optimal control system is developed to ensure closed-loop stability and to minimize a linear quadratic cost function. ... -
Design of Controllers for Quadratic Stability and Disturbance Attenuation of Uncertain Systems
(The American Society of Mechanical Engineers (ASME), 1997)In this paper, we discuss the design of controllers that provide quadratic stability and a desirable disturbance attenuation level (through an appropriately small L2 gain) for systems with time ... -
Accuracy of Discrete Models for the Solution of the Inverse Dynamics Problem for Flexible Arms, Feasible Trajectories
(The American Society of Mechanical Engineers (ASME), 1997)The inverse dynamics problem for a single link flexible arm is considered. The tracking order of consistent and lumped finite element models is derived and compared with the tracking order of ... -
Active Vibration Control of Distributed Systems Using Delayed Resonator With Acceleration Feedback
(The American Society of Mechanical Engineers (ASME), 1997)The Delayed Resonator (DR) and Dual Frequency Fixed Delayed Resonator (DFFDR) are newly introduced control techniques for active vibration absorption. Both methods propose a delayed position ... -
Accounting for Out-of-Bandwidth Modes in the Assumed Modes Approach: Implications on Colocated Output Feedback Control
(The American Society of Mechanical Engineers (ASME), 1997)Colocated, output feedback is commonly used in the control of reverberant systems. More often than not, the system to be controlled displays high modal density at a moderate frequency, and ... -
Melnikov-Based Open-Loop Control of Escape for a Class of Nonlinear Systems
(The American Society of Mechanical Engineers (ASME), 1997)The performance of certain nonlinear stochastic systems is deemed acceptable if during a specified time interval, the systems have sufficiently low probabilities of escape from a preferred region ... -
Robust Control Design for Pole Assignment of Uncertain Systems
(The American Society of Mechanical Engineers (ASME), 1997)This Technical Brief addresses the problem of robust pole assignment for uncertain dynamic systems. A control design methodology is proposed to determine a fixed controller assigning all poles ... -
Force Feedback in Adaptive Trusses for Vibration Isolation in Flexible Structures
(The American Society of Mechanical Engineers (ASME), 1997)This paper addresses the transmission of unwanted vibrations in flexible structures by actively minimizing dynamic forces seen at critical locations within the structure. An adaptive truss serves ... -
Consistent Task Specification for Manipulation Systems With General Kinematics
(The American Society of Mechanical Engineers (ASME), 1997)Although most of the literature on manipulation systems deals with systems with as many degrees of freedom as the dimension of their task space, or even with more (redundant manipulators), ... -
Controller Design of a Distributed Slewing Flexible Structure—A Frequency Domain Approach
(The American Society of Mechanical Engineers (ASME), 1997)The vibration control of a slewing flexible structure by collocated and noncollocated feedback is presented in this paper. A stability criterion derived from the root locus method in frequency ... -
On-Line Estimation of Laser Weld Penetration
(The American Society of Mechanical Engineers (ASME), 1997)High-power CO2 laser welding has been widely used in the industry because of its high productivity and excellent weld quality. In order to tap the potential of this process completely, it is ... -
System Identification and Adaptive Control of the Multi-Axis Bending and Twisting Process
(The American Society of Mechanical Engineers (ASME), 1997)An adaptive control scheme for the multi-axis bending and twisting process based on system identification of process models is presented. Three system identification methods, the frequency-response, ...