Now showing items 3561-3580 of 5605

    • Stability Robustness of Discrete-Time Singular Systems With Structured Parameter Perturbations 

      Jyh-Horng Chou; Shinn-Horng Chen; Liang-An Zheng (The American Society of Mechanical Engineers (ASME), 1999)
      In this paper, the stability robustness of linear discrete-time singular systems with structured parameter perturbations is investigated. A new sufficient criterion is presented for ensuring that ...
    • A Reduced Order Time-Delay Control for Highly Simplified Brushless DC Motor 

      Pyung H. Chang; Jung-Hoon Lee; Suk-Ho Park (The American Society of Mechanical Engineers (ASME), 1999)
      A reduced order time-delay control is derived and applied to the position control of a brushless DC motor with a highly simplified hardware configuration: use of six-step commutation without ...
    • Optimal Control of Arrays of Microcantilevers 

      Mariateresa Napoli; Bassam Bamieh; Mohammed Dahleh (The American Society of Mechanical Engineers (ASME), 1999)
      In this paper we will present a model for an array of microcantilevers that are used in Atomic Force Microscopy and nano-scale manufacturing. The microcantilevers are connected to each other ...
    • Adaptive Control of a Class of Uncertain Dynamic Delay Systems 

      Said Oucheriah (The American Society of Mechanical Engineers (ASME), 1999)
      A robust adaptive controller is developed for a class of uncertain linear dynamic delay-systems where the bound of uncertainty is unknown but its functional form is known. It is shown that ...
    • A Periodic Multirate Adaptive Pole Placer for Possibly Nonminimum Phase Plants 

      K. G. Arvanitis (The American Society of Mechanical Engineers (ASME), 1999)
      A new indirect adaptive algorithm is derived for pole placement control of linear continuous-time systems with unknown parameters. The control structure proposed relies on a periodic controller, ...
    • A Random Approach to Time-Optimal Control 

      Piotr Kulczycki (The American Society of Mechanical Engineers (ASME), 1999)
      This paper concerns the time-optimal control for objects described by a random differential inclusion with discontinous right-hand side, representing the second law of Newtonian mechanics and ...
    • Adaptive Post-Linearization of Dynamic Nonlinear Systems With Artificial Neural Networks 

      M. Rabinowitz; G. M. Gutt; G. F. Franklin (The American Society of Mechanical Engineers (ASME), 1999)
      We have applied tailor-made neural networks to the post-linearization of nonlinear systems containing memory. The problems we address involve tracking systems that contain linear dynamics together ...
    • A Simplified Robust Circle Criterion Using the Sensitivity-Based Quantitative Feedback Theory Formulation 

      David F. Thompson (The American Society of Mechanical Engineers (ASME), 1999)
      The circle criterion provides a sufficient condition for global asymptotic stability for a specific class of nonlinear systems, those consisting of the feedback interconnection of a single-input, ...
    • Rapid Tracking With Automatic Trajectory Optimization for Speed 

      C. C. H. Ma; T. W. T. Qian (The American Society of Mechanical Engineers (ASME), 1999)
      An automatic trajectory optimization scheme, which takes the system dynamics into account, is presented in this paper. It is developed for use in conjunction with the rapid-tracking learning ...
    • Dynamic Modeling of a Flexible Manipulator With Prismatic Links 

      B. J. Torby; I. Kimura (The American Society of Mechanical Engineers (ASME), 1999)
      In this paper the equations of motion for a flexible multi-link manipulator are derived. Each link of the manipulator, including those with prismatic motion, is represented by two finite elements ...
    • Multivariable Bilinear Vehicle Control Using Steering and Individual Wheel Torques 

      Wilbur Langson; Andrew Alleyne (The American Society of Mechanical Engineers (ASME), 1999)
      The focus of this paper is the stabilization of vehicle motion to a prescribed path while integrating an increased subset of vehicle inputs than was previously attempted. The integration of ...
    • Joint Air-Fuel Ratio and Torque Regulation Using Secondary Cylinder Air Flow Actuators 

      A. G. Stefanopoulou; J. A. Cook; J. W. Grizzle; J. S. Freudenberg (The American Society of Mechanical Engineers (ASME), 1999)
      Actuation schemes exist that permit the joint management of air and fuel flow into the cylinders of a spark ignition engine. With the exception of drive by wire systems, to-date, the transient ...
    • Adaptive Sinusoidal Disturbance Rejection in Linear Discrete-Time Systems—Part I: Theory 

      Foued Ben Amara; Pierre T. Kabamba; A. Galip Ulsoy (The American Society of Mechanical Engineers (ASME), 1999)
      An adaptive regulation approach against disturbances consisting of linear combinations of sinusoids with unknown and/or time varying amplitudes, frequencies, and phases for SISO LTI discrete-time ...
    • Preview-Based Stable-Inversion for Output Tracking of Linear Systems 

      Qingze Zou; Santosh Devasia (The American Society of Mechanical Engineers (ASME), 1999)
      Stable Inversion techniques can be used to achieve high-accuracy output tracking. However, for nonminimum phase systems, the inverse is noncausal—hence the inverse has to be precomputed using a ...
    • A New Compensator for Servo Systems With Position Dependent Friction 

      Jia-Yush Yen; Shih-Jung Huang; Shu-Shong Lu (The American Society of Mechanical Engineers (ASME), 1999)
      In this study, we present a new compensator design for systems with position dependent friction. Position dependent friction occurs between revolving parts that are conventionally used in mechanical ...
    • Adaptive Sinusoidal Disturbance Rejection in Linear Discrete-Time Systems—Part II: Experiments 

      Foued Ben Amara; Pierre T. Kabamba; A. Galip Ulsoy (The American Society of Mechanical Engineers (ASME), 1999)
      The problem of adaptive noise cancellation in an acoustic duct is discussed. An adaptive controller design approach based on parametrizing the set of stabilizing controllers using the Youla ...
    • An Iterative Learning Control for Uncertain Systems Using Structured Singular Value 

      Tae-Yong Doh; Myung Jin Chung; Jung-Ho Moon (The American Society of Mechanical Engineers (ASME), 1999)
      To deal with an iterative learning control (ILC) system with plant uncertainty, a set of new terms related with robust convergence is first defined. This paper proposes a sufficient condition ...
    • Friction Identification Using Evolution Strategies and Robust Control of Positioning Tables 

      Seon-Woo Lee; Jong-Hwan Kim (The American Society of Mechanical Engineers (ASME), 1999)
      This paper presents an identification technique using evolution strategies (ES) for an integrated friction model of a positioning table. The friction model is based on Karnopp’s friction-velocity ...
    • Catastrophes in Optimal Control 

      Osita D. I. Nwokah; Daré Afolabi; E. Borzova; Gemunu S. Happawana (The American Society of Mechanical Engineers (ASME), 1999)
      System optimization over a parameter space produces optimal solutions which lie on the bifurcation set of the ambient space. As such, the optimality (quality) metric (as a function of the ...
    • The Control and Containment Forces on the Swash Plate of an Axial-Piston Pump 

      Noah D. Manring (The American Society of Mechanical Engineers (ASME), 1999)
      In this research, the control and containment forces and moments acting on the swash plate of an axial-piston pump are examined. From a practical standpoint, swash plate control and containment ...