Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 2941-2960 of 5605
-
System-Level Model and Stochastic Optimal Control for a PEM Fuel Cell Hybrid Vehicle
(The American Society of Mechanical Engineers (ASME), 2006)System-level modeling and control strategy development for a fuel cell hybrid vehicle (FCHV) are presented in this paper. A reduced-order fuel cell model is created to accurately predict the ... -
Measurement and Modeling of Dynamic Rolling Friction in Linear Microball Bearings
(The American Society of Mechanical Engineers (ASME), 2006)In prior work of the authors and co-workers, a vision-based system was developed for characterizing the tribological behavior of silicon-micromachined linear microball bearings. Plain difference ... -
Human Operator Performance Testing Using an Input-Shaped Bridge Crane
(The American Society of Mechanical Engineers (ASME), 2006)The payload oscillation inherent to all cranes makes it challenging for human operators to manipulate payloads quickly, accurately, and safely. An input-shaping controller was implemented on a ... -
A Multivariable and Multi-Objective Approach for the Control of Hot-Strip Mills
(The American Society of Mechanical Engineers (ASME), 2006)The control of a hot strip rolling mill is quite a complex problem due to the presence of many simultaneous control tasks. This is the main motivation that spurred the major steel corporations ... -
New Results on Robot Modeling and Simulation
(The American Society of Mechanical Engineers (ASME), 2006)In this paper the possibility of simulating the robot forward dynamics by making use of the inertia matrix and of the kinetic energy gradient only is demonstrated. Such method is shown to ... -
Interaction Between Secondaries in a Thermal-Hydraulic Network
(The American Society of Mechanical Engineers (ASME), 2006)The design of one secondary loop of a complex network often neglects the effect that its operation has on the others. The present is a study of hydrodynamic and thermal interaction between ... -
Reducing Engine Idle Speed Deviations Using the Internal Model Principle
(The American Society of Mechanical Engineers (ASME), 2006)Presented in this paper is a multivariable linear feedback controller design methodology for idle speed control of spark-ignition engines. The engine is modeled as a multi-input, single-output ... -
Induced Master Motion in Force-Reflecting Teleoperation
(The American Society of Mechanical Engineers (ASME), 2006)Telerobotic systems have persistently struggled to provide users with realistic force feedback; high-frequency contact transients convey important information about the remote environment but are ... -
Intelligent Modeling of Thrust Force in Drilling Process
(The American Society of Mechanical Engineers (ASME), 2006)In this paper, an intelligent modeling strategy for thrust force in drilling process is proposed. First of all, neural network (NN) models are developed to model the thrust force in drilling ... -
High Precision Hydrostatic Actuation Systems for Micro- and Nanomanipulation of Heavy Loads
(The American Society of Mechanical Engineers (ASME), 2006)In this paper reports on an important finding, that is, hydrostatic actuation systems are able to manipulate heavy loads with submicron precision and a large stroke. In this relation, the ... -
Convex Optimization Approach to Observer-Based Stabilization of Uncertain Linear Systems
(The American Society of Mechanical Engineers (ASME), 2006)New sufficient linear matrix inequality conditions guaranteeing the stability of uncertain linear systems by means of dynamic output feedbacks are presented. It is shown that the search of an ... -
Velocity and Acceleration Cones for Kinematic and Dynamic Constraints on Omni-Directional Mobile Robots
(The American Society of Mechanical Engineers (ASME), 2006)We consider the problems of kinematic and dynamic constraints, with actuator saturation and wheel slippage avoidance, for motion planning of a holonomic three-wheeled omni-directional robot. That ... -
Evaluation of Nonlinear Dynamics Using Optimal Motion Planning
(The American Society of Mechanical Engineers (ASME), 2006)The precise control of a manipulator depends on its velocity as well as on its configuration and dynamic properties. This paper presents some observations that can serve as a useful tool for ... -
Control Authority of a Projectile Equipped With an Internal Unbalanced Part
(The American Society of Mechanical Engineers (ASME), 2006)A key technical challenge for smart weapon developers is the design of appropriate control mechanisms that provide sufficient control authority to enable correction of typical trajectory errors ... -
Real-Time Tip-Over Prevention and Path Following Control for Redundant Nonholonomic Mobile Modular Manipulators via Fuzzy and Neural-Fuzzy Approaches
(The American Society of Mechanical Engineers (ASME), 2006)This paper presents a practical method for automatic tip-over prevention and path following control of a redundant nonholonomic mobile modular manipulator. According to modular robot concept, the ... -
Dynamic Performance, Mobility, and Agility of Multilegged Robots
(The American Society of Mechanical Engineers (ASME), 2006)Background . This article presents a method for describing the dynamic performance of multilegged robots. It involves examining how well the legged system uses ground contact to produce acceleration ... -
Multi-Degree-of-Freedom Precision Position Sensing and Motion Control Using Two-Axis Hall-Effect Sensors
(The American Society of Mechanical Engineers (ASME), 2006)This paper presents a novel precision position-sensing methodology using two-axis Hall-effect sensors, where the absolute multi-degree-of-freedom (DOF) positioning of a device above any magnet matrix ... -
Predictive Control for Time-Delayed Switching Control Systems
(The American Society of Mechanical Engineers (ASME), 2006)A methodology is proposed for the control of switching systems characterized by linear system dynamics with a time delay in the input channel. The method incorporates a state predictor that ... -
Unidrive Modular Robot: Dynamics, Control, and Experiments
(The American Society of Mechanical Engineers (ASME), 2006)In this paper, a control design methodology for the new class of modular robots so-called “unidrive modular robots” is introduced. Unidrive modular robots because of employing only a single ... -
Adaptive Synchronized Control for a Planar Parallel Manipulator: Theory and Experiments
(The American Society of Mechanical Engineers (ASME), 2006)In this paper, we develop a new control method, termed adaptive synchronized (A-S) control, for improving tracking accuracy of a P-R-R type planar parallel manipulator with parametric uncertainty. ...