Now showing items 2861-2880 of 5605

    • State Feedback Gain Scheduling for Linear Systems With Time-Varying Parameters 

      Vinícius F. Montagner; Pedro L. D. Peres (The American Society of Mechanical Engineers (ASME), 2006)
      This paper addresses the problem of parameter dependent state feedback control (i.e. gain scheduling) for linear systems with parameters that are assumed to be available (measured or estimated) ...
    • Nondiagonal QFT Controller Design for a Three-Input Three-Output Industrial Furnace 

      M. Garcia-Sanz; M. Barreras (The American Society of Mechanical Engineers (ASME), 2006)
      This paper addresses the temperature control of a three-input (power supplies) three-output (temperature sensors) industrial furnace used to manufacture large composite pieces. Due to the multivariable ...
    • The Extended Variable Structure Filter 

      Saeid Habibi (The American Society of Mechanical Engineers (ASME), 2006)
      In this paper, a new method for state estimation, referred to as the variable structure filter (VSF), is briefly reviewed. The VSF method is model based and has been formulated for its ...
    • Dynamics of a Basketball Rolling Around the Rim 

      C. Q. Liu; Fang Li; R. L. Huston (The American Society of Mechanical Engineers (ASME), 2006)
      Governing dynamical equations of motion for a basketball rolling on the rim of a basket are developed and presented. These equations form a system of five first-order, ordinary differential ...
    • Special Issue on Novel Robotics and Control 

      Sunil Agrawal; Venkat Krovi; Marcia O'Malley (The American Society of Mechanical Engineers (ASME), 2006)
      This special issue focuses on the following topic areas: (i) Biomimetics and locomotion, (ii) mobile vehicles, (iii) human-robot systems and haptic interfaces, and (iv) novel systems modeling and ...
    • A Generalized Time-Optimal Bidirectional Scan Algorithm for Constrained Feed-Rate Optimization 

      J. Dong; J. A. Stori (The American Society of Mechanical Engineers (ASME), 2006)
      The problem of generating an optimal feed-rate trajectory has received a significant amount of attention in both the robotics and machining literature. The typical objective is to generate a ...
    • Stable Reconfigurable Generalized Predictive Control With Application to Flight Control 

      Jianjun Shi; Atul G. Kelkar; Don Soloway (The American Society of Mechanical Engineers (ASME), 2006)
      This paper presents the development of a multiinput multioutput generalized predictive control (GPC) law and its application to reconfigurable control design in the event of actuator saturation. ...
    • The Bouncing Ball Apparatus as an Experimental Tool 

      Ananth Kini; Thomas L. Vincent; Brad Paden (The American Society of Mechanical Engineers (ASME), 2006)
      The bouncing ball on a sinusoidally vibrating plate exhibits a rich variety of nonlinear dynamical behavior and is one of the simplest mechanical systems to produce chaotic behavior. A computer ...
    • Neuro-Adaptive Friction Compensation for Single-Link Flexible Robots Using Serial-Gray-Box Modeling Strategy 

      Ali Bazaei; Vahid Johari Majd (The American Society of Mechanical Engineers (ASME), 2006)
      In this paper a previously offered black-box filtered-error neural-approximation-based control method for singularly perturbed flexible-link arms (FLA) is extended to a serial-gray-box method that ...
    • Modeling and Analysis of Automatic Transmission Engagement Dynamics-Linear Case 

      Joško Deur; Jahan Asgari; Petar Kovač; Davor Hrovat (The American Society of Mechanical Engineers (ASME), 2006)
      A control-oriented model of a typical four-speed automatic transmission is developed by using the bond graph modeling method. The planetary gear set model utilizes the Karnopp friction model for ...
    • Identification of Contact Dynamics Model Parameters From Constrained Robotic Operations 

      M. Weber; K. Patel; O. Ma; I. Sharf (The American Society of Mechanical Engineers (ASME), 2006)
      With the fast advances in computing technology, contact dynamics simulations are playing a more important role in the design, verification, and operation support of space systems. The validity ...
    • Active Vibration Control of a Flexible Beam Using a Buckling-Type End Force 

      Shahin Nudehi; Ranjan Mukherjee; Steven W. Shaw (The American Society of Mechanical Engineers (ASME), 2006)
      In this paper, we explore the use of end forces for vibration control in structural elements. The process involves vibration measurement and observer-based estimation of modal amplitudes, which ...
    • Experimental Verification of Real-Time Control for Flexible Systems With On-Off Actuators 

      William Singhose; Hideto Okada; Saburo Matunaga; Erika Biediger (The American Society of Mechanical Engineers (ASME), 2006)
      A technique for driving a flexible system with on-off actuators is presented and experimentally verified. The control system is designed to move the rigid body of a structure a desired distance ...
    • Modeling and Analysis of Automatic Transmission Engagement Dynamics-Nonlinear Case Including Validation 

      Joško Deur; Jahan Asgari; Davor Hrovat (The American Society of Mechanical Engineers (ASME), 2006)
      A typical control-oriented automatic transmission model does not include some mostly nonlinear effects such as transmission component friction and backlash, Stribeck clutch friction, clutch drag, ...
    • Localization and Quantification of Breathing Crack 

      Milos Musil (The American Society of Mechanical Engineers (ASME), 2006)
      The possibility of localizing and quantifying a crack in a vibrating structure based on measured vibration amplitudes of the first and second harmonic in some locations of the structure and ...
    • Modeling and Identification of Hysteresis in Piezoelectric Actuators 

      T.-J. Yeh; Shin-Wen Lu; Ting-Ying Wu (The American Society of Mechanical Engineers (ASME), 2006)
      In this paper, a model and the associated identification procedure are proposed to precisely portray the hysteresis behavior in piezoelectric actuators. The model consists of basic physical ...
    • Feedback Control of Braking Deceleration on Railway Vehicle 

      Masanobu Nankyo; Tadashi Ishihara; Hikaru Inooka (The American Society of Mechanical Engineers (ASME), 2006)
      An increase of the deceleration in high-speed and high-density train operations degrades riding comfort and frequently causes wheel skids. This requires an introduction of the control technology ...
    • Reliability Indexed Sensor Fusion and Its Application to Vehicle Velocity Estimation 

      Hyeongcheol Lee (The American Society of Mechanical Engineers (ASME), 2006)
      Reliability indexed sensor fusion (RISF) is a new estimation techique which uses process and measurement noise covariances as the reliability index in an adaptive Kalman filter framework. In ...
    • Robustness Limitations in Self-Sensing Magnetic Bearings 

      Eric H. Maslen; Dominick T. Montie; Tetsuya Iwasaki (The American Society of Mechanical Engineers (ASME), 2006)
      Self-sensing magnetic bearings use measurements of voltage and current in electromagnets to estimate the position of a magnetically levitated object. By estimating position in this manner, explicit ...
    • Torque Control of Electrorheological Fluidic Resistive Actuators for Haptic Vehicular Instrument Controls 

      M. A. Vitrani; J. Nikitczuk; G. Morel; C. Mavroidis; B. Weinberg (The American Society of Mechanical Engineers (ASME), 2006)
      Force-feedback mechanisms have been designed to simplify and enhance the human-vehicle interface. The increase in secondary controls within vehicle cockpits has created a desire for a simpler, ...