Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 2761-2780 of 5605
-
An Instrumental Variable Method for Continuous-Time Transfer Function Model Identification With Application to Controller Auto-Tuning
(The American Society of Mechanical Engineers (ASME), 2007)An instrumental variable algorithm is presented that estimates the coefficients of a continuous transfer function model directly from sampled data. The algorithm is based on instrumental variables ... -
Comparison of EKBF-based and Classical Friction Compensation
(The American Society of Mechanical Engineers (ASME), 2007)In servo control, traditionally, models that attempt to capture the friction-velocity curve and interactions at contacting surfaces have been used to compensate for friction-introduced tracking ... -
A Stability Space of a Magnetomechanical Bearing
(The American Society of Mechanical Engineers (ASME), 2007)Permanent magnet pairs have negligible friction; however, the levitating member is unstable. In this paper, it is demonstrated that if the other member vibrates in a suitable way, the levitating ... -
Stability of a Time-Delayed System With Parametric Excitation
(The American Society of Mechanical Engineers (ASME), 2007)This paper investigates two different temporal finite element techniques, a multiple element (h-version) and single element (p-version) method, to analyze the stability of a system with a ... -
Design of Takagi-Sugeno Fuzzy Region Controller Based on Rule Reduction, Robust Control, and Switching Concept
(The American Society of Mechanical Engineers (ASME), 2007)This paper presents a new structure of Takagi-Sugeno (T-S) fuzzy controllers, which is called T-S fuzzy region controller or TSFRC for short. The fuzzy region concept is used to partition the ... -
Optimal Performance of Variable Stiffness Devices for Structural Control
(The American Society of Mechanical Engineers (ASME), 2007)This paper addresses control of structural vibrations using semi-active actuators that are capable of manipulating stiffness and∕or producing variable stiffness. Usually vibration suppression is ... -
Adaptive Control of Harmonic Drives
(The American Society of Mechanical Engineers (ASME), 2007)Aimed at achieving ultrahigh control performance for high-end applications of harmonic drives, an adaptive control algorithm using additional sensing, namely, the joint and motor positions and the ... -
Dynamic Stability of Open-Loop Hopping
(The American Society of Mechanical Engineers (ASME), 2007)Simulations and physical robots have shown that hopping and running are possible without sensory feedback. However, stable behavior is often limited to a certain range of the parameters of the ... -
An Interval Analysis Algorithm for Automated Controller Synthesis in QFT Designs
(The American Society of Mechanical Engineers (ASME), 2007)In this paper, an interval analysis algorithm is proposed for the automatic synthesis of fixed structure controllers in quantitative feedback theory (QFT). The proposed algorithm is tested on ... -
Independent Identification of Friction Characteristics for Parallel Manipulators
(The American Society of Mechanical Engineers (ASME), 2007)The compensation for friction or joint losses in robotic manipulators contributes to an important improvement of the control quality. Besides appropriate friction modeling, experimental identification ... -
Oscillation Control of Quay-Side Container Cranes Using Cable-Length Manipulation
(The American Society of Mechanical Engineers (ASME), 2007)Cranes play a very important role in the shipping industry. As a result there is an increasing demand on faster and safer cranes. Inertial forces on crane payloads due to crane-commanded ... -
A Stochastic Form of a Human Driver Steering Dynamics Model
(The American Society of Mechanical Engineers (ASME), 2007)This work develops a stochastic form of a human driver model which can be used for simulating vehicle guidance and control. The human motor-control function is complex and can be affected by ... -
Adaptive Input Shaping for Nonlinear Systems: A Case Study
(The American Society of Mechanical Engineers (ASME), 2007)Input shaping is a technique that seeks to reduce residual vibrations of lightly damped systems through modification of the command input to the system. Although several input shaping techniques ... -
On Fractional-Order QFT Controllers
(The American Society of Mechanical Engineers (ASME), 2007)We propose the synthesis of robust fractional-order controllers using the principles of quantitative feedback theory (QFT). The resulting controllers are called as fractional-order QFT controllers. ... -
Time Series Based Structural Damage Detection Algorithm Using Gaussian Mixtures Modeling
(The American Society of Mechanical Engineers (ASME), 2007)In this paper, a time series based detection algorithm is proposed utilizing the Gaussian Mixture Models. The two critical aspects of damage diagnosis that are investigated are detection and ... -
Parameter Identification for a High-Performance Hydrostatic Actuation System Using the Variable Structure Filter Concept
(The American Society of Mechanical Engineers (ASME), 2007)Parameter estimation is an important concept that can be used for health and condition monitoring. Estimation or measurement of physically meaningful parameters and their evaluation against ... -
Energy Saving in Pneumatic Servo Control Utilizing Interchamber Cross-Flow
(The American Society of Mechanical Engineers (ASME), 2007)This paper proposes a structure and control approach for the energy saving servo control of a pneumatic servo system. The energy saving approach is enabled by supplementing a standard four-way ... -
An Approach for Model Updating of a Multiphysics MEMS Micromirror
(The American Society of Mechanical Engineers (ASME), 2007)In this work, a general approach is formulated for updating the parameters of systems governed by multiphysics equations. The optimization technique is based on Genetic Algorithms (GAs). GAs ... -
Adaptive Synchronization Control of Multiple Spacecraft Formation Flying
(The American Society of Mechanical Engineers (ASME), 2007)An adaptive nonlinear synchronization control approach is developed for multiple spacecraft formation flying with elliptical reference orbits. It can guarantee that both the tracking errors and ... -
Reliable Robust H∞ Fuzzy Control for Uncertain Nonlinear Systems With Markovian Jumping Actuator Faults
(The American Society of Mechanical Engineers (ASME), 2007)This paper is concerned with the design of reliable robust H∞ fuzzy control for uncertain nonlinear continuous-time systems with Markovian jumping actuator faults. The Takagi and Sugeno fuzzy ...