Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 2581-2600 of 5605
-
Internal Model Control for Dynamic Systems With Preceded Backlash
(The American Society of Mechanical Engineers (ASME), 2009)A discrete-time internal model control approach for nonsmooth nonlinear systems described by a pseudo-Hammerstein model with backlash is presented. In this method, the controlled system is described ... -
Minimum-Time/Energy, Output Transitions for Dual-Stage Systems
(The American Society of Mechanical Engineers (ASME), 2009)This article addresses the optimal (minimum-time/energy) trajectory design for changing the output from one value y̱ to another y¯ within a finite time interval [0,tf] called the output-transition ... -
An Approach for Actuation Specification and Synthesis of Dynamic Systems
(The American Society of Mechanical Engineers (ASME), 2009)Refinement or improvement of a dynamic system to meet a frequency response specification can benefit from the option to use passive or active compensation, or a combination of both. The process ... -
Modeling, Experimentation, and Simulation of an Air-Over-Hydraulic Brake System
(The American Society of Mechanical Engineers (ASME), 2009)This paper deals with the development and validation of an analytical dynamic model of an air-over-hydraulic (AOH) brake system that is widely used on loaders. The AOH system is broken into ... -
A Parametric Model for Ionization Current in a Four Stroke SI Engine
(The American Society of Mechanical Engineers (ASME), 2009)A model for the thermal part of an ionization signal is presented that connects the ionization current to cylinder pressure and temperature in a spark ignited internal combustion engine. One ... -
Networked Assembly of Mechatronic Linear Physical System Models
(The American Society of Mechanical Engineers (ASME), 2009)Engineering design is evolving into a global activity. Globally distributed design requires efficient global distribution of models of dynamic physical systems through computer networks. These ... -
On Stability Problems of Supply Networks Constrained With Transport Delay
(The American Society of Mechanical Engineers (ASME), 2009)Transportation is one of the most crucial components in supply networks. In transportation lines, there exists a finite time between products leaving a point and arriving to another point in ... -
Online Switching Control of LFT Parameter-Dependent Systems
(The American Society of Mechanical Engineers (ASME), 2009)To improve controlled performance and expand gain-scheduling control capability, we propose a switching control approach of linear fractional transformation parameter-dependent systems using multiple ... -
Measurement-Level Integration of Carrier-Phase GPS and Laser-Scanner for Outdoor Ground Vehicle Navigation
(The American Society of Mechanical Engineers (ASME), 2009)This paper introduces a navigation system based on combined global positioning system (GPS) and laser-scanner measurements for outdoor ground vehicles. Using carrier-phase differential GPS, ... -
Nonsingular Serret–Frenet Based Path Following Control for an Underactuated Surface Vessel
(The American Society of Mechanical Engineers (ASME), 2009)In this paper we develop a new control law to steer an underactuated surface vessel along a predefined path at a constant forward speed controlled by the main thruster system. The methodology ... -
Robust Negative Input Shapers for Vibration Suppression
(The American Society of Mechanical Engineers (ASME), 2009)Input shaping is a control method that limits motion-induced oscillation in vibratory systems by intelligently shaping the reference command. As with any control method, the robustness of input ... -
Robust Stabilization and Disturbance Rejection for a Class of Hybrid Linear Systems Subject to Exponential Uncertainty
(The American Society of Mechanical Engineers (ASME), 2009)In this paper, we address the problem of robust stabilization and disturbance rejection for a class of hybrid linear systems subject to exponential uncertainties. By using Taylor series approximation ... -
Physics-Based Modeling and Control of Residual-Affected HCCI Engines
(The American Society of Mechanical Engineers (ASME), 2009)Homogeneous charge compression ignition (HCCI) is a novel combustion strategy for IC engines that exhibits dramatic decreases in fuel consumption and exhaust emissions. Originally conceived in ... -
Modeling the Vacuum Circuit of a Pneumatic Valve System
(The American Society of Mechanical Engineers (ASME), 2009)The aim of this article is to present the theoretical and experimental work related to the vacuum system used for controlling the actuation of pneumatic valves in internal combustion engines ... -
Optimal Tracking Using Magnetostrictive Actuators Operating in Nonlinear and Hysteretic Regimes
(The American Society of Mechanical Engineers (ASME), 2009)Many active materials exhibit nonlinearities and hysteresis when driven at field levels necessary to meet stringent performance criteria in high performance applications. This often requires nonlinear ... -
Development of a Fast Operation Algorithm of a Small-Scale Fuel Cell System With Solar Reforming
(The American Society of Mechanical Engineers (ASME), 2009)The small-scale bioethanol steam reforming system (FBSR), using sunlight applied to a heat source, is a very clean method, which can supply fuel to a fuel cell. However, it is difficult to ... -
Realization-Preserving Structure and Order Reduction of Nonlinear Energetic System Models Using Energy Trajectory Correlations
(The American Society of Mechanical Engineers (ASME), 2009)Previous work by the authors developed algorithms for simplifying the structure of a lumped dynamic system model and reducing its order. This paper extends this previous work to enable simultaneous ... -
Motion Planning and Tracking for Tip Displacement and Deflection Angle for Flexible Beams
(The American Society of Mechanical Engineers (ASME), 2009)Explicit motion-planning reference solutions are presented for flexible beams with Kelvin–Voigt (KV) damping. The goal is to generate periodic reference signals for the displacement and deflection ... -
The Role of Boundary Control in Enhancing Damage Identification Using Eddy Current Sensors
(The American Society of Mechanical Engineers (ASME), 2009)Eddy current sensors provide an inexpensive means of detecting surface and embedded flaws in metallic structures due to fatigue, corrosion, and manufacturing defects. However, use of eddy current ... -
System Identification and Robust Controller Design Using Genetic Algorithms for Flexible Space Structures
(The American Society of Mechanical Engineers (ASME), 2009)This paper is concerned with the problem of identifying and controlling flexible structures. The structures used exhibit some of the characteristics found in large flexible space structures ...