Journal of Dynamic Systems, Measurement, and Control: Recent submissions
Now showing items 1521-1540 of 5605
-
A Systematic Determination Approach of Model's Base Using Gap Metric for Nonlinear Systems
(The American Society of Mechanical Engineers (ASME), 2016)This paper proposes a novel gap metric based fuzzy decomposition approach resulting in a reduced model bank that provides enough information to design controllers. It requires, first, the determination of the model base. ... -
Investigation of an Energy Efficient Hydraulic Propulsion System for a Railway Machine
(The American Society of Mechanical Engineers (ASME), 2016)Many railway construction and maintenance machines have large masses and perform repetitive working cycles with frequent stops that require precise positioning. For these reasons, a hydraulic propulsion system is a convenient ... -
Observer Based Feedback Control of Networked Control Systems With Delays and Packet Dropouts
(The American Society of Mechanical Engineers (ASME), 2016)The observerbased feedback controller of a new linear networked control system (NCS) with both delays and packet dropouts is designed when the state information is not fully available. With the effects of transmission ... -
Modeling and Simulation of the Steady State and Transient Performance of a Three Way Pressure Reducing Valve
(The American Society of Mechanical Engineers (ASME), 2016)This paper deals with modeling and simulation of a class of threeway pressure reducing valves. The study aims to point out the peculiarities of function and operation of this class of valves in the steadystate and transient ... -
Modeling of Flexible Robots With Varying Cross Section and Large Link Deformations
(The American Society of Mechanical Engineers (ASME), 2016)In this paper, a very easy, numerically stable and computationally efficient method is presented, which allows the modeling and simulation of a flexible robot with high precision. The proposed method is developed under the ... -
Dynamic High Gain Observer to Estimate Pneumatic Actuator Temperatures
(The American Society of Mechanical Engineers (ASME), 2016)This paper deals with the estimation of the actuator temperature in an electropneumatic system. First, an appropriate nonlinear system that accounts for the actuator temperature dynamics is introduced. Then in order to ... -
Adaptive Nonlinear Sliding Mode Control of Mechanical Servo System With LuGre Friction Compensation
(The American Society of Mechanical Engineers (ASME), 2016)In this paper, the parameter identification and control problem are investigated for a mechanical servo system with LuGre friction. First of all, an intelligent glowworm swarm optimization (GSO) algorithm is developed to ... -
Adaptive Robust Stabilization of the Furuta's Pendulum Via Attractive Ellipsoid Method
(The American Society of Mechanical Engineers (ASME), 2016)This paper focuses on the issue of adaptiverobust stabilization of the Furuta's pendulum around unstable equilibrium where the dynamical model is unknown. The control scheme lies at the lack of the dynamical model as well ... -
Internal Model Control–Proportional Integral Derivative–Fractional Order Filter Controllers Design for Unstable Delay Systems
(The American Society of Mechanical Engineers (ASME), 2016)An analytical design for proportional integral derivative (PID) controller cascaded with a fractionalorder filter is proposed for firstorder unstable processes with time delay. The design algorithm is based on the internal ... -
Global Finite Time Stabilization of a Class of Uncertain MIMO Nonlinear Systems
(The American Society of Mechanical Engineers (ASME), 2016)It is aimed to obtain global finite time stabilization of a class of uncertain multiinput–multioutput (MIMO) nonlinear systems in the presence of bounded disturbances by applying nonsingular terminal sliding mode ... -
A Computationally Efficient Approach for Optimizing Lithium Ion Battery Charging
(The American Society of Mechanical Engineers (ASME), 2016)This paper presents a framework for optimizing lithiumion battery charging, subject to side reaction constraints. Such healthconscious control can improve battery performance significantly, while avoiding damage phenomena, ... -
Vibration Reduction Using Near Time Optimal Commands for Systems With Nonzero Initial Conditions
(The American Society of Mechanical Engineers (ASME), 2016)The control of flexible systems has been an active area of research for many years because of its importance to a wide range of applications. The majority of previous research on timeoptimal control has concentrated on the ... -
Robust Full Order and Reduced Order Observers for a Class of Uncertain Switched Systems
(The American Society of Mechanical Engineers (ASME), 2016)This paper deals with the problem of robust state estimation for a class of switched linear systems with unknown inputs under average dwell time (ADT) switching, where the switching of the observers is synchronous with ... -
Nonlinear Recursive Estimation With Estimability Analysis for Physical and Semiphysical Engine Model Parameters
(The American Society of Mechanical Engineers (ASME), 2016)A methodology for nonlinear recursive parameter estimation with parameter estimability analysis for physical and semiphysical engine models is presented. Orthogonal estimability analysis based on parameter sensitivity is ... -
A Control Theoretic Approach for Solving Underdetermined Problems and Its Application to Control Allocation
(The American Society of Mechanical Engineers (ASME), 2016)In this paper, a new iterative algorithm is developed using control theoretic approach to find the minimum norm solution of underdetermined problems. The minimum norm solution is obtained by applying the H∠optimization ... -
Determination of Most Desirable Nominal Closed Loop State Space System Via Qualitative Ecological Principles
(The American Society of Mechanical Engineers (ASME), 2016)This paper addresses the issue of determining the most desirable “nominal closedloop matrix†structure in linear state space systems, from stability robustness point of view, by combining the concepts of “quantitative ... -
A Gain Scheduling Control Approach for Takagi–Sugeno Fuzzy Systems Based on Linear Parameter Varying Control Theory
(The American Society of Mechanical Engineers (ASME), 2016)Due to the universal approximation capability of Takagi–Sugeno (T–S) fuzzy models for nonlinear dynamics, many control issues have been investigated based on fuzzy control theory. In this paper, a transformation procedure ... -
Design of Automatic Landing Systems Using the H inf Control and the Dynamic Inversion
(The American Society of Mechanical Engineers (ASME), 2016)This paper focuses on the automatic control of aircraft in the longitudinal plane, during landing, by using the linearized dynamics of aircraft, taking into consideration the wind shears and the errors of the sensors. A ... -
Simple Clothoid Lane Change Trajectories for Automated Vehicles Incorporating Friction Constraints
(The American Society of Mechanical Engineers (ASME), 2016)This paper demonstrates that an autonomous vehicle can perform emergency lane changes up to the friction limits through realtime generation and evaluation of bielementary paths. Path curvature and friction determine the ... -
A Nonlinear Gain Scheduling Compensation Approach Using Parameter Dependent Lyapunov Functions
(The American Society of Mechanical Engineers (ASME), 2016)This paper addresses the gainscheduling control design for nonlinear systems to achieve output regulation. For gainscheduling control, the linear parametervarying (LPV) model is obtained by linearizing the plant about ...