Journal of Heat Transfer: Recent submissions
Now showing items 2741-2760 of 3611
-
Explicit Inversion of Stodola’s Area-Mach Number Equation
(The American Society of Mechanical Engineers (ASME), 2011)Stodola’s area-Mach number relation is one of the most widely used expressions in compressible flow analysis. From academe to aeropropulsion, it has found utility in the design and performance ... -
Effects of Suction and Blowing on Flow and Heat Transfer Between Two Rotating Spheres With Time-Dependent Angular Velocities
(The American Society of Mechanical Engineers (ASME), 2011)The effect of suction and blowing in the study of flow and heat transfer of a viscous incompressible fluid between two vertically eccentric rotating spheres is presented when the spheres are ... -
Estimation and Analysis of Surface Heat Flux During Quenching in CNT Nanofluids
(The American Society of Mechanical Engineers (ASME), 2011)In this article, water based carbon nanotube (CNT) nanofluids have been used as quenchants to study their effects on the heat transfer rate during immersion quenching. For this purpose, water ... -
Optical Measurement of Thermal Conductivity Using Fiber Aligned Frequency Domain Thermoreflectance
(The American Society of Mechanical Engineers (ASME), 2011)Fiber aligned frequency domain thermoreflectance (FAFDTR) is a simple noncontact optical technique for accurately measuring the thermal conductivity of thin films and bulk samples for a wide range ... -
A Dynamic Film Model of the Pulsating Heat Pipe
(The American Society of Mechanical Engineers (ASME), 2011)This article deals with the numerical modeling of the pulsating heat pipe (PHP) and is based on the film evaporation/condensation model recently applied to the single-bubble PHP (, 2010, ... -
The Effect of the Corrugation Rib Angle of Attack on the Fluid Flow and Heat Transfer Characteristics Inside Corrugated Ribbed Passage
(The American Society of Mechanical Engineers (ASME), 2011)Heat transfer enhancement using corrugated ribbed passages is one of the common enhancement techniques inside heat exchangers. The present study investigated numerically the effect of the corrugation ... -
Transient Thermal Response of Turbulent Compressible Boundary Layers
(The American Society of Mechanical Engineers (ASME), 2011)A numerical method is developed with the capability to predict transient thermal boundary layer response under various flow and thermal conditions. The transient thermal boundary layer variation ... -
Flow Structure and Heat Transfer in a Stagnation Flow CVD Reactor
(The American Society of Mechanical Engineers (ASME), 2011)An experimental study is undertaken to investigate the flow structure and heat transfer in a stagnation flow chemical vapor deposition (CVD) reactor at atmospheric pressure. It is critical to ... -
Underhood Buoyancy Driven Flow—An Experimental Study
(The American Society of Mechanical Engineers (ASME), 2011)Particle image velocimetry and thermal measurements using thermocouples are used to measure the buoyant flow of a simplified full-scale model of an engine compartment. The engine block surface ... -
Inverse Estimation for Heat Flux Distribution at the Metal-Mold Interface Using Fuzzy Inference
(The American Society of Mechanical Engineers (ASME), 2011)This study provides a new inverse approach based on fuzzy inference for solving the problem of estimating heat flux distribution at the metal-mold interface in the continuous casting process. ... -
Casing Convective Heat Transfer Coefficient and Reference Freestream Temperature Determination Near an Axial Flow Turbine Rotor
(The American Society of Mechanical Engineers (ASME), 2011)The present study explains a steady-state method of measuring convective heat transfer coefficient on the casing of an axial flow turbine. The goal is to develop an accurate steady-state heat ... -
Surface Functionalization Mechanisms of Enhancing Heat Transfer at Solid-Liquid Interfaces
(The American Society of Mechanical Engineers (ASME), 2011)Two mechanisms that enhance heat dissipation at solid-liquid interfaces are investigated from the atomistic point of view using nonequilibrium molecular dynamics simulation. The mechanisms include ... -
Constructal Design of Complex Assembly of Fins
(The American Society of Mechanical Engineers (ASME), 2011)Constructal design is a method that conducts the designer toward flow (e.g., heat flux) architectures that have greater global performance. This numerical work uses this method to seek for the ... -
Thermal and Hydraulic Performance of Counterflow Microchannel Heat Exchangers With and Without Nanofluids
(The American Society of Mechanical Engineers (ASME), 2011)This paper analyzes the thermal and hydraulic performance of a counterflow microchannel heat exchanger (CFMCHE) with and without nanofluid as working fluid. A 3D conjugate heat transfer simulation ... -
Subcooled Boiling of PF-5060 Dielectric Liquid on Microporous Surfaces
(The American Society of Mechanical Engineers (ASME), 2011)Presented are the results of experiments that investigated nucleate boiling of PF-5060 on microporous Cu surface layers at saturation and 10 K, 20 K, and 30 K subcooling. The three microporous ... -
Biological Temperature Sensing of Focal Contacts
(The American Society of Mechanical Engineers (ASME), 2011) -
IR Thermography of Two-Phase Microgap Cooler
(The American Society of Mechanical Engineers (ASME), 2011) -
Investigation of Surface Convection Enhancement by a V-Formation Winglet Array Using Infrared Thermography
(The American Society of Mechanical Engineers (ASME), 2011) -
Transport in Passive, High Thermal, Conductivity Heat Spreaders
(The American Society of Mechanical Engineers (ASME), 2011) -
Modeling and Validating the Transient Behavior of Flat Miniature Heat Pipes Manufactured in Multilayer Printed Circuit Board Technology
(The American Society of Mechanical Engineers (ASME), 2011)A novel, integrated approach in thermal management of electronic products, based on two-phase cooling, is presented. A flat miniature heat pipe, integrated inside the laminated structure of a ...