Journal of Heat Transfer: Recent submissions
Now showing items 2621-2640 of 3611
-
Using MicroCT Imaging Technique to Quantify Heat Generation Distribution Induced by Magnetic Nanoparticles for Cancer Treatments
(The American Society of Mechanical Engineers (ASME), 2011)Magnetic nanoparticles have been used in clinical and animal studies to generate localized heating for tumor treatments when the particles are subject to an external alternating magnetic field. ... -
Enhanced Specific Heat of Silica Nanofluid
(The American Society of Mechanical Engineers (ASME), 2011)Silica nanoparticles (1% by weight) were dispersed in a eutectic of lithium carbonate and potassium carbonate (62:38 ratio) to obtain high temperature nanofluids. A differential scanning calorimeter ... -
Analytical Solution for Thermally Fully Developed Combined Electroosmotic and Pressure-Driven Flows in Narrow Confinements With Thick Electrical Double Layers
(The American Society of Mechanical Engineers (ASME), 2011)In the present paper, closed form solutions for the Nusselt number are obtained for hydrodynamically and thermally fully developed combined electroosmotic and pressure-driven flows in narrow ... -
Modeling of Free Convection Heat Transfer to a Supercritical Fluid in a Square Enclosure by the Lattice Boltzmann Method
(The American Society of Mechanical Engineers (ASME), 2011)During the last decade, a number of numerical computations based on the finite volume approach have been reported, studying various aspects of heat transfer near the critical point. In this ... -
Laminar Heat and Mass Transfer in Rotating Cone-and-Plate Devices
(The American Society of Mechanical Engineers (ASME), 2011)The convective diffusion of feeding culture and the effect of fluid shear stress on endothelial cells are frequently investigated in cone-and-plate devices. Laminar fluid flow and heat and mass ... -
Numerical Analysis of the Time-Dependent Energy and Momentum Transfers in a Rarefied Gas Between Two Parallel Planes Based on the Linearized Boltzmann Equation
(The American Society of Mechanical Engineers (ASME), 2011)Periodic time-dependent behavior of a rarefied gas between two parallel planes caused by an oscillatory heating of one plane is numerically studied based on the linearized Boltzmann equation. ... -
Special Issue on Heat and Mass Transfer in Biosystems
(The American Society of Mechanical Engineers (ASME), 2011)The involvement of the heat transfer community in the research related to heat and mass transfer in biosystems increases rapidly and covers a wide variety of applications. While the past ... -
MHD Mixed Convection Boundary Layer Flow Toward a Stagnation Point on a Vertical Surface With Induced Magnetic Field
(The American Society of Mechanical Engineers (ASME), 2011)In this paper, the steady magnetohydrodynamic (MHD) mixed convection stagnation point flow of an incompressible, viscous, and electrically conducting fluid over a vertical flat plate is investigated. ... -
Mixed Convective Heat Transfer Past a Heated Square Porous Cylinder in a Horizontal Channel With Varying Channel Height
(The American Society of Mechanical Engineers (ASME), 2011)The laminar mixed convection flow across the porous square cylinder with the heated cylinder bottom at the axis in the channel has been carried out numerically in this paper using a semi-implicit ... -
Phonon Boundary Effects and Thermal Conductivity of Rough Concentric Nanowires
(The American Society of Mechanical Engineers (ASME), 2011)By using a phonon hydrodynamics model for heat flow complemented with boundary conditions for smooth or rough boundaries, we study the influence of boundary conditions on the longitudinal thermal ... -
Bifurcated Forced Convective Heat Transfer of Supercritical CO2 Flow in Plane Symmetric Sudden Expansion Duct
(The American Society of Mechanical Engineers (ASME), 2011)This study presents a computational investigation of forced convection of supercritical CO2 flow in plane symmetric sudden expansion duct at an expansion ratio of 2 in flow asymmetric regime. ... -
Cost and Entropy Generation Minimization of a Cross-Flow Plate Fin Heat Exchanger Using Multi-Objective Genetic Algorithm
(The American Society of Mechanical Engineers (ASME), 2011)In the present work, a thermal modeling is conducted for optimal design of compact heat exchangers in order to minimize cost and entropy generation. In this regard, an ε−NTU method is applied ... -
Thermal Conductivity Measurement of Graphene Exfoliated on Silicon Dioxide
(The American Society of Mechanical Engineers (ASME), 2011)We have developed a nanofabricated resistance thermometer device to measure the thermal conductivity of graphene monolayers exfoliated onto silicon dioxide. The measurement results show that the ... -
Modeling of Heat Transfer in Microchannel Gas Flow
(The American Society of Mechanical Engineers (ASME), 2011)Due to the existence of a velocity slip and temperature jump on the solid walls, the heat transfer in microchannels significantly differs from the one in the macroscale. In our research, we ... -
The Physical Mechanism of Heat Transfer Augmentation in Stagnating Flows Subject to Freestream Turbulence
(The American Society of Mechanical Engineers (ASME), 2011)Experiments have been performed in a water tunnel facility to examine the physical mechanism of heat transfer augmentation by freestream turbulence in classical Hiemenz flow. A unique experimental ... -
Heat Transfer Enhancement of MHD Flow by Conducting Strips on the Insulating Wall
(The American Society of Mechanical Engineers (ASME), 2011)Due to the magnetohydrodynamic (MHD) effect, which degrades heat transfer coefficients by pulsation suppression of the external magnetic field, on the electrically conducting flow, the wall with ... -
Heat Transfer in Thin Multilayered Plates—Part I: A New Approach
(The American Society of Mechanical Engineers (ASME), 2011)We present a new model for the determination of temperature distributions in thin plates consisting of many different layers. The method uses both continuous and discrete approaches. The derived ... -
Heat and Mass Transfer on the MHD Fluid Flow Due to a Porous Rotating Disk With Hall Current and Variable Properties
(The American Society of Mechanical Engineers (ASME), 2011)The steady magnetohydrodynamics (MHD) laminar compressible flow of an electrically conducting fluid on a porous rotating disk is considered in the present paper. The governing equations of motion ... -
Convective Heat Transfer on a Rotating Disk With Transverse Air Crossflow
(The American Society of Mechanical Engineers (ASME), 2011)In this study, the local convective heat transfer from a rotating disk with a transverse air crossflow was evaluated using an infrared thermographic experimental setup. Solving the inverse ... -
Temperature Created by a Tilted Moving Heat Source: Heating Line and Cylinder
(The American Society of Mechanical Engineers (ASME), 2011)Temperatures created by a moving tilted line and a moving tilted cylinder are considered. Analytical expressions for low Peclet (Pe⪡1) and high Peclet (Pe⪢1) numbers are obtained for the whole ...