ASME: Recent submissions
Now showing items 601-620 of 108258
-
Observer-Based Data-Driven Consensus Control for Nonlinear Multi-Agent Systems Against Denial-of-Service and False Data Injection Attacks
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. This paper introduces a distributed data-driven attack-resilient consensus problem under both false data injection (FDI) and denial-of-service (DoS) attacks and proposes a data-driven consensus control framework, ... -
Uncertainty Quantification Analysis of Turbine Parameters Based on Conjugate Heat Transfer Calculation
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. The energy conversion of aero engines is borne by turbines, which are closely related to engine performance and service life. In order to operate stably in harsh conditions and high-temperature inflow environments, ... -
Experimental Investigation of Condensing Two-Phase Flows in a Turbocharger Turbine for Fuel Cell Applications
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. The development of turbocharger turbines for fuel cell (FC) applications introduces unique challenges due to the working fluid. High humidity air as exhaust gas from the fuel cell can lead to condensation effects, ... -
Experimental Study on the Flexural Performance of Corrosion-Prone Concrete Beam Partly Reinforced With Carbon Textile
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. Textile-reinforced concrete (TRC) is gaining popularity due to its sustainability and performance advantages, particularly in applications where conventional steel reinforcement might not work. TRC, a state-of-the-art ... -
Performance Analysis of a Concentrated Photovoltaic–Thermal Hybrid System Coupled to a Heat Pump for Residential Heating Application
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. This study presents a numerical analysis of an indirect-expansion water-to-air heat pump (HP) combined in series with linear concentrating photovoltaic thermal collectors (CPVT), to meet the space heating demand ... -
A Feasibility Enhancing Hybrid Learning Approach for Motion Planning for Manipulators in Manufacturing Setups
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. Industrial robots are widely used in diverse manufacturing environments. Nonetheless, how to enable robots to automatically plan trajectories for changing tasks presents a considerable challenge. Further complexities ... -
Ergonomically Designed Crutches Decrease Ground Reaction Forces, Joint Moments, and Underarm Pressure Compared to Standard Crutches During Walking
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. Studies show that crutch walking is slower than unassisted walking, requires more energy, and may introduce risk factors for injuries in the arms and/or the healthy leg. This study compared the differences between ... -
Model Predictive Control of the Hydration Process in a Lime-Based Thermochemical Energy Storage System
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. Thermochemical energy storage systems offer a sustainable solution for storing excess renewable energy. This work focuses on a particular application based on CaO/Ca(OH)2 for heat storage. To ensure safe and ... -
ThermoDynaSMT: A Physics-Informed Machine Learning Model for Component Displacement in Surface Mount Technology
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. In surface mount technology (SMT), the precision of micro-scale passive components (MSPC) placement on printed circuit boards (PCBs) is critical, influenced by the self-alignment behavior after the soldering ... -
Adversarial Domain Adaptation for Improved Part-to-Part Generalization of Deep Learning Segmentation Models in Aerosol Jet Printing
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. The segmentation performance of deep learning (DL) models is highly dependent on the statistical/probabilistic distribution and characteristics of the data used during their training process. Unfortunately, the ... -
Effect of Surface Roughness, Contact Angle, and Temperature on Salt Crystallization From Sessile Drops
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. This study investigated the influence of salt solution drying temperature, substrate material, and surface roughness on deposit morphology and deposition pattern. Sessile drop drying experiments were conducted ... -
Fully Premixed Hydrogen-Air Swirl Flames: Shapes and Transient Processes
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. This article characterizes lean fully premixed hydrogen-air swirled flames obtained experimentally. The laboratory-scale experiment developed prior to acquiring the flame imaging data is described along with the ... -
Dependence of Localized Necking Behavior on the Specimen Shapes in Tensile Testing of Ultra-Thin Copper Alloy Sheet
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. The effect of specimen shape on the fracture angle in tensile testing of copper alloy sheets was investigated. Specimens with a width-to-thickness ratio of more than 30 were investigated, and it was found that ... -
Enhanced Performance of Two- and Three-Terminal Perovskite/Silicon Tandem Solar Panels Through Optimized Orientation and Tracking
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. The worldwide requirement for the most efficient and sustainable solar energy solutions has driven the development of bifacial and tandem photovoltaic (PV) technologies. The adoption of bifacial perovskite–silicon ... -
Thermal Modeling and Feedforward Control for Defect Mitigation in Laser Powder Bed Fusion Process
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. Modeling and control of the spatiotemporal temperature distribution (thermal history) in laser powder bed fusion (LPBF) is critical because the thermal history governs defects, such as porosity, poor surface ... -
Optimization of Narrow Cavity Flow Field Via a Passive Self-Exciting Slot Jet for Root Canal Irrigation
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. Root canal treatment is crucial for preventing oral diseases, and its success hinges on the effective removal of biofilm and debris from the canal wall by the irrigant. However, the intricate and narrow anatomy ... -
Thermo-Mechanical Simulation Framework for Assessing Process-Induced Delamination Risks in Large-Area Fan-Out Panel-Level Packaging
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. This study develops a finite element modeling (FEM) framework for predicting interfacial fracture behavior during the debonding stage of fan-out panel-level packaging (FOPLP). Although FOPLP offers advantages ... -
Numerical and Experimental Analysis of the Tip Leakage Flow in a Squealer Low-Pressure Turbine Blade for Different Operating Conditions
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. This study combines experiments and numerical simulations (3D-Reynolds-averaged Navier–Stokes (RANS)) to achieve a deep understanding of the effects induced by varying key parameters affecting tip leakage flow ... -
Enabling Operational Flexibility of Power Generation Systems: Novel Experimental Facility for Characterization of Turbine Casing Thermal Field
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. Flexible operations comprising rapid startup, shut-down, and high ramp rates are critical in a power system with accelerated renewable penetration. However, it amplifies thermal stresses and impacts plant cyclic ... -
Selecting Laminate Configurations for Training a DeepONet to Predict Incremental Hole-Drilling Calibration Constants in Fiber-Reinforced Plastic Laminates
(The American Society of Mechanical Engineers (ASME), 2026)Abstract. Measuring residual stress is critical for assessing the structural integrity and performance of fiber-reinforced plastic (FRP) laminates. The incremental hole-drilling (IHD) method, a common technique for this ...