Journal of Structural Engineering: Recent submissions
Now showing items 881-900 of 10765
-
Tests on CFS Laced Columns Composed of Plain Channels: Behavior and Design
(ASCE, 2022-03-11)A test program on cold-formed steel (CFS) laced columns fabricated using plain channels has been presented in this study. Twelve specimens with single and N-type lacing configurations were fabricated. The lacing plates and ... -
Galloping Stability Criterion for a 3-DOF System Considering Aerodynamic Stiffness and Inertial Coupling
(ASCE, 2022-03-17)Inertial coupling and aerodynamic stiffness play important roles in the prediction of galloping stability but have rarely been considered in previous studies. By considering both factors together, a galloping stability ... -
Modeling Crushed Concrete Depth and Its Impact on Anchors Shear Capacities
(ASCE, 2022-02-28)Concrete anchors in base plate connections may develop large bending moments under shear. The moments were shown to be proportional to the length of laterally unsupported anchor shafts, referred to as the effective exposed ... -
Mapping of Temperature-Induced Response Increments for Monitoring Long-Span Steel Truss Arch Bridges Based on Machine Learning
(ASCE, 2022-02-26)Temperature-induced responses have been found to be sensitive to changes in bridge properties. Accordingly, researchers have sought to develop temperature-response mappings that could be used in assessing bridge conditions; ... -
Robustness of Post-Tensioned Concrete Beam-Column Subassemblies under Various Column Removal Scenarios
(ASCE, 2022-02-24)To fully recognize the load-resisting mechanisms of post-tensioned concrete (PC) structures with realistic boundary conditions against disproportionate collapse, four beam-column subassemblies were extracted from a prototype ... -
Development of Rotation Capacity Model for Web Cleat Connections against Progressive Collapse: Bayesian Approach
(ASCE, 2022-03-10)Catenary action is recognized as one of the main resistance mechanisms for typical steel frame structures against progressive collapse. As a result of catenary action, large rotation, and axial tension demand are applied ... -
Net Section Failure of S690 High-Strength Steel Angle-to-Plate Connections
(ASCE, 2022-02-03)The net section fracture behavior and resistance of S690 high-strength steel angle-to-plate connections were investigated in this paper, underpinned by testing and numerical modeling. The experiments were conducted on 23 ... -
Experimental Study on Static Strength of Damaged Concrete Arches Reinforced by Corrugated Steel
(ASCE, 2022-03-09)Reinforcing old bridges with corrugated steel (CS) is gaining interest due to outstanding reinforcement effects and relative ease of implementation. The approach consists of positioning the CS member under an old bridge ... -
Predicting Flexural Capacity of Ultrahigh-Performance Concrete Beams: Machine Learning–Based Approach
(ASCE, 2022-02-24)Despite ongoing research efforts aimed at understanding the structural response of ultrahigh-performance concrete (UHPC) beams, there are very limited provisions for structural design of UHPC beams, specifically under ... -
Parametrized Wind–Surge–Wave Fragility Functions for Wood Utility Poles
(ASCE, 2022-03-31)Wood poles are among key components of the overhead grid infrastructure that are highly vulnerable to wind hazards. In coastal regions where hurricanes are often accompanied with a storm surge, in addition to high wind ... -
Shake-Table Tests and Numerical Analysis of Steel Frames with Self-Centering Viscous-Hysteretic Devices under the Mainshock–Aftershock Sequences
(ASCE, 2022-02-09)Shake-table tests, subjected to mainshock–aftershock sequences, were conducted on a 1/3-scaled 3-story steel frame equipped with self-centering viscous-hysteretic devices (SC-VHDs) and its primary frame to investigate the ... -
Mechanical Performance of Timber-to-Timber Joints with Densified Wood Dowels
(ASCE, 2022-02-07)The wooden peg made of hardwood is one of the oldest fasteners. However, the relatively poor mechanical properties (strength and ductility) compared with steel restrict their applications in modern timber construction. ... -
New Design Approach to High-Strength Steel Staggered-Hole Bolted Connections Failing in Block Shear
(ASCE, 2022-02-21)The complex behavior of high-strength steel staggered-hole bolted connections failing in block shear with a combination of tension and inclined shear behavior was studied in this work. In particular, the location of the ... -
Structural Topology Design Optimization of Fiber-Reinforced Composite Frames with Fundamental Frequency Constraints
(ASCE, 2022-02-11)Fiber-reinforced polymer (FRP) composite frames are the ideal main support structure in civil and aerospace engineering applications because of their excellent material and structural properties for high stiffness ratio, ... -
Blast Performance of Steel Frames Equipped with NiTi SMA Bolts: Design Procedure and Numerical Evaluation
(ASCE, 2022-02-21)This study evaluated the performance of smart steel moment-resisting frame structures (MRFs) equipped with nickle titanium shape-memory alloy (NiTi SMA) connection systems subjected to blast overpressure. A total of five ... -
Experimental Cyclic Response of a Novel Friction Connection for Seismic Retrofitting of RC Buildings with CLT Panels
(ASCE, 2022-03-10)The seismic vulnerability of existing RC framed buildings in seismic-prone areas requires affordable and practice-oriented solutions for their retrofitting. In this paper, the authors present a retrofitting solution for ... -
Behavior and Design of Power-Actuated Fastener Connections in Cold-Formed Steels Subjected to Shear
(ASCE, 2022-03-12)This study proposes an innovative type of simple connection utilizing power-actuated fasteners to join a cold-formed steel channel to a rectangular hollow section column via a web-side plate or a T-section. An experimental ... -
Cyclic-Loading Performance of Steel Beam-to-Column Moment Connections to an I-Section Column
(ASCE, 2022-02-10)Six full-scale specimens were tested to examine the cyclic-loading performance of steel moment connections between an I-section beam and I-section column. The specimens represented the current practice in Japan in materials, ... -
Full-Scale Cross-Laminated Timber Diaphragm Evaluation. I: Design and Full-Scale Diaphragm Testing
(ASCE, 2022-03-04)The objective of this study was to monotonically test two 7.32×7.32-m (24×24-ft) cross-laminated timber (CLT) diaphragms designed using the provisions of ANSI/AWC 2021 (AWC. 2021. Special design provisions for wind and ... -
Full-Scale Cross-Laminated Timber Diaphragm Evaluation. II: CLT Diaphragm Connection Tests
(ASCE, 2022-03-04)The objective of this study was to conduct tests on diaphragm connection configurations that either matched or were similar to those used in the full-scale diaphragm tests described in the Part 1 companion study (Line ...