Journal of Structural Engineering: Recent submissions
Now showing items 5201-5220 of 10765
-
Discussion of “Lateral Stiffness of Shear Walls with Openings” by A. Neuenhofer
(American Society of Civil Engineers, 2007) -
Response Gradients for Nonlinear Beam-Column Elements under Large Displacements
(American Society of Civil Engineers, 2007)Accurate and efficient response gradient computations for nonlinear geometry are required in structural reliability, optimization, system identification, and response sensitivity analysis of frame structures that undergo ... -
Benefits of Using Puddled HSC with Fibers in Slabs to Transmit HSC Column Loads
(American Society of Civil Engineers, 2007)The benefits of using “puddled” fiber-reinforced high-strength concrete for the transmission of loads from high-strength columns through slabs is demonstrated. Compression tests were performed on two slab-column specimens ... -
Strengthening of RC Continuous Beams by External Prestressing
(American Society of Civil Engineers, 2007)This paper presents the test results on 12 two-span continuous T-beams strengthened using different external tendon types and profiles and subjected to third-point loadings. Test results indicated that an increase in ... -
Realistic Models for Local Bond Stress-Slip of Reinforced Concrete under Repeated Loading
(American Society of Civil Engineers, 2007)The crack widths of reinforced concrete flexural members are influenced by repetitive fatigue loadings. The bond stress-slip relation is necessary to estimate these crack widths realistically. The purpose of the present ... -
Nonprismatic Beam Element for Beams with RBS Connections in Steel Moment Frames
(American Society of Civil Engineers, 2007)This paper presents the development of a nonprismatic beam element for modeling the elastic behavior of steel beams with reduced beam section (RBS) connections. The accuracy of this element is evaluated by comparisons with ... -
List of Reviewers
(American Society of Civil Engineers, 2007) -
Alternative Approach to Optimal Tuning Parameter of Liquid Column Damper for Seismic Applications
(American Society of Civil Engineers, 2007)A closed-form solution for the optimum tuning ratio of a liquid column damper (LCD) that is valid for damped structures subjected to generalized seismic loading is presented. The closed-form expression is based on the ... -
Direct Damage-Controlled Design of Concrete Structures
(American Society of Civil Engineers, 2007)The basic methods of structural concrete design that have been developed so far cannot directly control damage, either at the local or the global level. In order to develop an integrated scheme for direct damage control ... -
Seismic Performance of PR Frames in Mid-America Earthquake Region
(American Society of Civil Engineers, 2007)The wind moment frame (WMF) method has been and continues to be widely utilized in the central and eastern United States, resulting in a very large population of structures having been designed without a rigorous analysis ... -
Effect of Temperature on Modal Variability of a Curved Concrete Bridge under Ambient Loads
(American Society of Civil Engineers, 2007)This paper reports on the effect of temperature on the modal properties for a curved posttensioned bridge. The goal has been to explore how ambient vibrations based on routine traffic excitation can be used as part of a ... -
Fatigue Strength of End-Coped Crane Runway Girders
(American Society of Civil Engineers, 2007)Fatigue cracks were found on a series of end-coped crane runway girders after 14 years of service in a steel mill building in China. Two typical crane runway girders with different spans were studied in this paper. Finite ... -
Self-Diagnosis and Self-Repair of an Active Tensegrity Structure
(American Society of Civil Engineers, 2007)This paper focuses on the study of tensegrity active control in situations of partially defined loading and damage events. Self-diagnosis and self-repair methodologies are proposed and validated experimentally on a full-scale ... -
Elastoplastic Confinement Model for Circular Concrete Columns
(American Society of Civil Engineers, 2007)This paper presents relatively simple, analytically derived curves to model the axial and the lateral stress-strain relations of circular concrete columns. The analytical curves describe the full elastoplastic behavior of ... -
Behavior and Design of Seam-Welded Stainless Steel Circular Hollow Section Flexural Members
(American Society of Civil Engineers, 2007)In an experimental study, a series of tests was performed on seam-welded structural stainless steel circular hollow sections (CHS) subjected to bending. The test program included various cross section geometries of CHS ... -
Rigid Element Approach for Deriving the Geometric Stiffness of Curved Beams for Use in Buckling Analysis
(American Society of Civil Engineers, 2007)For a -
Dynamic Analysis of Eccentrically Prestressed Damped Beam under Moving Harmonic Force Using Higher Order Shear Deformation Theory
(American Society of Civil Engineers, 2007)The dynamic behavior of an eccentrically prestressed simply supported beam under a moving harmonic force is studied by using the higher order shear deformation theory in this paper. The prestressed tendon is assumed straight ... -
Large-Scale Testing of a Replaceable “Fuse” Steel Coupling Beam
(American Society of Civil Engineers, 2007)When coupled core wall (CCW) systems are built in regions of high seismicity, the ductility demands on the coupling beams can be of critical concern. Steel coupling beams, whether encased in concrete or not, offer a very ... -
Bridge Network Maintenance Optimization Using Stochastic Dynamic Programming
(American Society of Civil Engineers, 2007)This paper presents a stochastic dynamic programming (DP) procedure for multiobjective optimization of bridge network maintenance planning that involves a group of existing highway bridges with various remaining service ... -
Three Hundred Years of Bar Theory
(American Society of Civil Engineers, 2007)