Journal of Structural Engineering: Recent submissions
Now showing items 3721-3740 of 10765
-
Closure to “<i>Postbuckling Behavior of Steel‐Plate Shear Walls under Cyclic Loads</i>” by M. Elgaaly, V. Caccese, and C. Du (February, 1993, Vol. 119, No. 2)
(American Society of Civil Engineers, 1994) -
Presliding Shear Failure in Prestressed RC Beams. I: Partial-Interaction Mechanism
(American Society of Civil Engineers, 2014)Despite significant experimental, numerical and analytical research, the shear behavior of reinforced concrete members remains one of the least well understood mechanisms in reinforced concrete. Because of the complexity ... -
Nonlinear Material Loss Factors of Single-Layer Latticed Domes Subjected to Earthquake Ground Motions
(American Society of Civil Engineers, 2015)The quantification of damping in a structure is of significant interest in structural dynamics. At present, there is still no clear consensus on how damping issues are resolved. Although the Rayleigh damping model, which ... -
Ultimate Strength of Damaged Tubular Bracing Members
(American Society of Civil Engineers, 1984)Simple design‐oriented analytical expressions are developed to estimate the reserve‐load carrying capacity of circular tubular beam‐column members with overall bending and local denting damage. The analysis is based on a ... -
Energy Method for Incremental Collapse Analysis of Framed Structures
(American Society of Civil Engineers, 1988)The entire spectrum of incremental collapse behavior of elastic‐perfectly plastic multistory rigid‐frame structures can be described by energy methods. The separation between safe and unsafe load ranges coincides precisely ... -
Experimental and Numerical Investigations of the Seismic Behavior of High-Strength Concrete Beam-Column Joints with Column Axial Load
(American Society of Civil Engineers, 2015)This paper presents the experimental findings of high-strength concrete (HSC) interior beam-column joints under column axial compressive loading. Eight full-scale interior beam-column joints with varying degrees of ... -
Response of SFRC Columns under Blast Loads
(American Society of Civil Engineers, 2015)Research has shown that the addition of steel fibers to concrete results in improved postcracking tensile capacity leading to enhanced toughness, ductility, and damage tolerance. These performance enhancements make steel ... -
Efficiently Implementing Genetic Optimization with Nonlinear Response History Analysis of Taller Buildings
(American Society of Civil Engineers, 2014)Nonlinear response history analysis is an important tool for accurately determining the performance of tall buildings under severe earthquake loading. When a standard genetic algorithm is used in conjunction with nonlinear ... -
First-Order Reliability Approach to Quantify and Improve Building Portfolio Resilience
(American Society of Civil Engineers, 2016)The concept of disaster-resilient communities has gained considerable acceptance and attention over the past decade, requiring the assessment of not only the monetary losses surrounding a hazard, but also the complex, ... -
Collapse Fragility of Steel Structures Subjected to Earthquake Mainshock-Aftershock Sequences
(American Society of Civil Engineers, 2014)This paper investigates the collapse probability of mainshock-damaged steel buildings in aftershocks, as an essential part of developing a framework to integrate aftershock seismic hazard into performance-based engineering ... -
Structural Behavior of SRC Beam-to-Column Joints Subjected to Simulated Fire Including Cooling Phase
(American Society of Civil Engineers, 2015)This paper presents the test results of three steel-reinforced concrete (SRC) columns to SRC beam joints under combined loading and fire. Simulated fires, including heating and cooling phases with different heating times, ... -
Blast Performance of Single-Span Precast Concrete Sandwich Wall Panels
(American Society of Civil Engineers, 2014)A research program was conducted to assess the capability of conventional non-load-bearing insulated precast concrete exterior wall panels to withstand blast loadings. Typical construction details from the tilt-up and ... -
Fire Performance of Steel Reinforced Concrete Columns
(American Society of Civil Engineers, 2015)Performance of steel reinforced concrete (SRC) columns under fire is investigated in this paper. A three-dimensional finite-element analysis (FEA) modeling is developed for sequentially coupled heat transfer and structural ... -
Longitudinal Plate and Through Plate-to-Hollow Structural Section Welded Connections
(American Society of Civil Engineers, 2003)A longitudinal branch plate-to-rectangular hollow structural section (HSS) member connection tends to cause excessive distortion of the HSS connecting face. Such a connection therefore results in a relatively low, deformation ... -
Experimental Study on the Seismic Performance of 3D Joints between Concrete-Filled Square Steel Tubular Columns and Composite Beams
(American Society of Civil Engineers, 2014)Six three-dimensional (3D) joints between concrete-filled square steel tubular columns and composite steel-concrete beams were tested under bidirectional reversal loads. The primary purpose of this experiment was to ... -
Automated Damage Index Estimation of Reinforced Concrete Columns for Post-Earthquake Evaluations
(American Society of Civil Engineers, 2015)The safety of buildings which have been affected by a natural disaster such as an earthquake is currently evaluated manually by certified inspectors who identify visible damage on the structural elements. This process has ... -
Reliability of Pseudodynamic Test in Earthquake Response Simulation
(American Society of Civil Engineers, 1989)This paper presents investigations into the capacity of the pseudodynamic (PSD) test to simulate the earthquake response of structures. First, algorithms developed for improving the displacement control in the PSD test are ... -
Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. II: Design of Capacity-Protected Elements
(American Society of Civil Engineers, 2015)Controlled rocking steel braced frames (CRSBFs) are intended to have a self-centering response that avoids damage to main structural elements. To ensure that all nonlinearity is confined to the intended elements at the ... -
Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. I: Methodological Framework and Design of Base Rocking Joint
(American Society of Civil Engineers, 2015)Controlled rocking steel braced frames (CRSBFs) are being developed as a seismic force resisting system that can be constructed economically to avoid structural damage and residual deformations following an earthquake. In ... -
Discussion of “Response Prediction of Geometrically Nonlinear Structures” by Kiyohiro Imai and Dan M. Frangopol
(American Society of Civil Engineers, 2002)