Journal of Structural Engineering: Recent submissions
Now showing items 3641-3660 of 10765
-
Seismic Fragility Evaluation of Lightly Reinforced Concrete-Block Shear Walls for Probabilistic Risk Assessment
(American Society of Civil Engineers, 2015)With the North American seismic codes moving toward adopting performance-based seismic design (PBSD) approaches, there is a need to develop seismic probabilistic risk assessment (PRA) tools for different construction ... -
Thermal Actions for Concrete Bridge Design
(American Society of Civil Engineers, 1993)Thermal effects have been frequently associated with concrete‐bridge damage. The nonlinear temperature distributions that arise in bridges are not easily estimated and are often considered in a simplified way, which may ... -
Seismic Performance Assessment of a Corroded 50-Year-Old Reinforced Concrete Building
(American Society of Civil Engineers, 2015)Deterioration due to corrosion becomes a more serious problem when future earthquakes with unpredicted intensity and time are considered. Therefore, the prediction of performance levels of corroded reinforced concrete ... -
Effect of Confinement on the Axial Load Response of Ultrahigh-Strength Concrete Columns
(American Society of Civil Engineers, 2015)Twelve ultrahigh-strength concrete (UHSC) columns confined by rectangular hoops and crossties were constructed and tested under pure axial load. Primary variables of the investigation were the amount, spacing, and configuration ... -
Numerical and Experimental Analysis of the Effect of Rigid Barriers on Blast Wave Propagation
(American Society of Civil Engineers, 2015)Many terrorist attacks have been carried out in recent years, such as in Oslo, Norway (2011), and more recently in Boston, Massachusetts, and in Volgograd, Russia (both 2013). Terrorist attacks target primarily public ... -
Investigation of Uncertainty Changes in Model Outputs for Finite-Element Model Updating Using Structural Health Monitoring Data
(American Society of Civil Engineers, 2014)This article aims to investigate the effect of uncertainties on the predicted response of structures using updated finite-element models (FEMs). Modeling uncertainties are quantified by fuzzy numbers and are incorporated ... -
Prestressed Concrete Girder Bridges with Corrugated Steel Webs: Review
(American Society of Civil Engineers, 2015)Since being pioneered in France in 1986, prestressed concrete girder bridges with corrugated steel webs have emerged as one of the most promising forms of steel-concrete composite bridges. Considerable theoretical and ... -
Vehicle Model for Highway Bridge Impact
(American Society of Civil Engineers, 1990)This paper suggests a simple vehicle model that may be used to estimate impact in highway bridges. In this model each axle load consists of a constant load together with a sinusoidally varying dynamic component with a ... -
Seismic Behavior of Posttensioned Self-Centering Precast Concrete Dual-Shell Steel Columns
(American Society of Civil Engineers, 2015)This paper describes an innovative bridge column technology for application in seismic regions. The proposed technology combines a precast posttensioned composite steel-concrete hollow-core column, with supplemental energy ... -
Seismic Behavior of Frame-Wall-Rocking Foundation Systems. I: Test Program and Slow Cyclic Results
(American Society of Civil Engineers, 2015)The mechanism of foundation rocking has received much attention recently due to its appealing seismic resistant features, namely, self-centering tendency and energy dissipation capability. It is well recognized, however, ... -
Discussion of “Finite-Element Parametric Study of Bond and Splitting Stresses in Reinforced Concrete Tie Members” by Armin Ziari and M. Reza Kianoush
(American Society of Civil Engineers, 2015) -
Dimensional Variations in Reinforced-Concrete Members
(American Society of Civil Engineers, 1995)This paper focuses on a study of the variations in geometrical quantities of reinforced-concrete members on three large project sites in Nigeria. Poor inspection enforcement during construction, among other factors, was ... -
Finite-Element Reliability Analysis of Structures Subjected to Fire
(American Society of Civil Engineers, 2015)A reliability-based design methodology is urgently needed in the fire resistant design of structures to ensure adequate reliability in the face of uncertainty. This paper presents the application of the analytical reliability ... -
Investigation of Concrete-Filled Double-Skin Steel Tubular Columns with Ultrahigh-Strength Steel
(American Society of Civil Engineers, 2015)Concrete-filled steel tubular (CFT) columns have been used increasingly in building structures because of their construction efficiency and provision of high stiffness and strength. A relatively new configuration design ... -
Lateral Loading Behaviors of Lightweight Wood-Frame Shear Walls with Ply-Bamboo Sheathing Panels
(American Society of Civil Engineers, 2015)This paper presents lateral-loading test results of lightweight wood-frame shear walls with ply-bamboo sheathing panels. Twenty shear walls of five different types of sizes, nailing, and loading schemes were tested under ... -
Extreme Value Distribution and Peak Factor of Crosswind Response of Flexible Structures with Nonlinear Aeroelastic Effect
(American Society of Civil Engineers, 2014)The crosswind response at the vicinity of vortex lock-in wind speed becomes an increasing concern in structural design of super tall buildings and other dynamically sensitive structures. Because of nonlinear aeroelastic ... -
Impact Studies of Multigirder Concrete Bridges
(American Society of Civil Engineers, 1993)The impact behavior of multiple vehicles moving across rough bridge decks on seven multigirder concrete bridges with different span lengths is studied. The bridges are modeled as grillage beam systems. The vehicle is ... -
Prestressed Beams with Openings and No Stirrups under Torsion and Bending
(American Society of Civil Engineers, 1993)Test results of 17 axially prestressed concrete beams without stirrups and containing a transverse circular opening are presented. Mainly, beams having two different opening diameters were subjected to various combinations ... -
Optimal Design of Viscous Dampers and Their Supporting Members for the Seismic Retrofitting of 3D Irregular Frame Structures
(American Society of Civil Engineers, 2015)This paper presents a formal optimization methodology for the design of seismic retrofitting of three-dimensional irregular buildings. The damping coefficients of viscous dampers potentially allocated in given feasible ... -
System-Level Displacement- and Performance-Based Seismic Design Parameter Quantifications for an Asymmetrical Reinforced Concrete Masonry Building
(American Society of Civil Engineers, 2015)This paper focuses on analyzing the performance of structural walls comprising the seismic force resisting system (SFRS) in a scaled asymmetrical fully grouted reinforced masonry (RM) building tested under quasi-static ...