Journal of Structural Engineering: Recent submissions
Now showing items 3601-3620 of 10765
-
Discussion of “<i>Anton Tedesko: Thin Shells and Esthetics</i>” by David P. Billington (November, 1982)
(American Society of Civil Engineers, 1984) -
Resistance of Flat-Plate Buildings against Progressive Collapse. I: Modeling of Slab-Column Connections
(American Society of Civil Engineers, 2015)A macromodel for slab-column connections is created for use in the system-level progressive collapse analyses of reinforced concrete flat-plate structures. The proposed model jointly uses shell and connector elements to ... -
Resistance of Flat-Plate Buildings against Progressive Collapse. II: System Response
(American Society of Civil Engineers, 2015)Using a macromodeling approach and alternate path method, dynamic and static analyses are performed to assess the progressive collapse resistance of a multistory reinforced concrete flat-plate building lacking structural ... -
Seismic Safety Evaluation of Reinforced Concrete Walls through FEMA P695 Methodology
(American Society of Civil Engineers, 2015)Quantification of building system performance and response parameters such as response modification coefficient ( -
Erratum: “Simplified Earthquake Analysis of Concrete Gravity Dams” by Gregory Fenves and Anil K. Chopra (August, 1987, Vol. 113, No. 8)
(American Society of Civil Engineers, 1988) -
Lateral Distribution of Loads in One‐Way Continuous Navy Pier Decks
(American Society of Civil Engineers, 1993)Distribution of wheel loads in concrete bridges has been addressed by AASHTO using the effective‐width concept, whereby the load is assumed to be laterally distributed over a width -
Tests of Profiled Steel Decks with V‐Stiffeners
(American Society of Civil Engineers, 1993)The size and position of intermediate stiffeners in the compression flanges of thin‐walled profiled steel decks exert a strong influence on the dominant buckling mode of the flange. The ability of the deck to provide both ... -
Closure to “Gabled Hyperbolic Paraboloid Roofs without Edge Beams” by Tamara Jadik Williams and David P. Billington
(American Society of Civil Engineers, 1996) -
Discussion of “<i>Cable‐Stayed Bridge Vibration due to Road Surface Roughness</i>” by Ton‐lo Wang and Dongzhou Huang (May, 1992, Vol. 118, No. 5)
(American Society of Civil Engineers, 1993) -
Closure to “<i>Design Pressures in Circular Bins</i>” by Mark E. Killion (August, 1985, Vol. 111, No. 8)
(American Society of Civil Engineers, 1987) -
Errata for “Wooden Ship Hulls as Box Girders with Multiple Interlayer Slip” by H. R. Milner and Jan Peczkis
(American Society of Civil Engineers, 2008) -
Stiffness Properties of Fixed and Guyed Platforms
(American Society of Civil Engineers, 1985)For deep‐water offshore structures, the fundamental period of lateral vibration is a key factor influencing their design feasibility. This period can be controlled by a rational selection of the parameters governing the ... -
Editor's Note
(American Society of Civil Engineers, 2001) -
Structural Characterization of Modern Highway Overcrossings—Case Study
(American Society of Civil Engineers, 2004)This paper revisits the mechanical characterization of the main substructure elements of highway overcrossings in an effort to build a more balanced methodology to compute the earthquake response of seismically protected ... -
Closure to “<i>Strength and Ductility of Confined Concrete</i>” by M. Saatcioglu and S. R. Razvi (June, 1992, Vol. 118, No. 6)
(American Society of Civil Engineers, 1993) -
Closure to “<i>Optimal Design for Plate Buckling</i>” by W. R. Spillers and Robert Levy (March, 1990, Vol. 116, No. 3)
(American Society of Civil Engineers, 1992) -
In Situ Nail Withdrawal Strengths in Wood Roof Structures
(American Society of Civil Engineers, 2014)Premature failure of wood roof sheathing under wind loading has primarily been blamed on poor nail installation resulting in reduced nail withdrawal strengths. However, this increased vulnerability could also result from ... -
Discussion of “<i>Hot Spot Stresses of Tubular Joints Subjected to Combined Loadings</i>” Ai‐Kah Soh and Chee‐Kiong Soh (February, 1993, Vol. 119, No. 2)
(American Society of Civil Engineers, 1994) -
Editor's Note
(American Society of Civil Engineers, 1998) -
Discussion of “<i>Dynamic Analysis of Structures by the DFT Method</i>” by Anestis S. Veletsos and Carlos E. Ventura (December, 1985, Vol. 111, No. 12)
(American Society of Civil Engineers, 1988)